Related Manuals for BT Lab Systems Mini 300
Summary of Contents for BT Lab Systems Mini 300
- Page 1 BT402 A Geno Technology, Inc. (USA) brand name Mini 300 Power Supply Cat. No. BT402 1-800-628-7730 1-314-991-6034 info@BTLabSystems.com ♦ ♦...
-
Page 2: Table Of Contents
WARNING ..............................3 SAFETY INFORMATION ..........................3 ENVIRONMENTAL CONDITIONS ........................ 4 AVOIDING ELECTRICAL SHOCK ........................4 AVOIDING DAMAGE TO THE INSTRUMENT ....................4 EQUIPMENT OPERATION .......................... 5 SYMBOL ..............................5 INTRODUCTION ............................. 6 OVERVIEW ..............................6 PRODUCT DESCRIPTION & FEATURE ......................7 TECHNICAL SPECIFICATION ........................... -
Page 3: Warning
WARNING BT Lab Systems Mini 300 Power Supply has been tested and found to comply with the limits for the CE regulation. Also, it is RoHS compliant to deliver confident product which meets the environmental directive. These limits are designed to provide reasonable protection against harmful interference when the instrument series is operated in a commercial environment. -
Page 4: Environmental Conditions
Follow the guidelines below to ensure safe operation of the unit. The Mini 300 Power Supply has been designed to utilize shielded wires thus minimizing any potential shock hazard to the user. BT Lab Systems recommends against the use of unshielded wires. -
Page 5: Equipment Operation
7. To avoid condensation after operating the power supply in a cold room, wrap the unit in a plastic bag and allow at least 2 hours for the unit to equilibrate to room temperature before removing the bag and operating the unit. 8. -
Page 6: Introduction
INTRODUCTION Overview BT Lab Systems Mini 300 Power Supplies are recognized as unique power supplies equipped with very powerful specifications to cover the majority of electrophoresis applications on the market. Sufficient and accurate output voltages, two terminal pairs, and its compacted size can deliver accurate and reliable experimental results from one experiment to another. -
Page 7: Product Description & Feature
Product Description & Feature Combining small size and versatility, the newly redesigned Mini 300 power supply is an ideal choice for any researcher. Capable of providing constant current or constant voltage in 1 mA or 1 V steps, the unit is perfectly suited to run both vertical polyacrylamide and horizontal agarose electrophoresis experiments. -
Page 8: Technical Specification
ETL, CE, FCC INSTALLATION INSTRUCTIONS Mini 300 Power Supply is actually a pre-installed instrument. As long as it is placed on a sturdy and level surface in a safe, dry place, and further connects with well-prepared electrophoresis system, it is ready for operation. -
Page 9: Operation Instructions
OPERATION INSTRUCTIONS Control interface Two step buttons are available. Press STEP 1 and STEP 2 buttons to switch between the steps Press MODE to switch setting mode among Voltage, Current and Time. LED lights indicate your current status. Press to increase or decrease the selected parameter Start stop the operations Start the operation Note: To operate under constant voltage or constant current modes, adjust the other parameter to the... - Page 10 4. Power on the unit by pressing the ON/OFF switch. 5. Press STEP 1 or STEP 2 to enter desired step 6. Press MODE to switch between Voltage, Current and Time 7. Adjust the output value by pressing the up and down arrows. NOTE: When timer is set to “0”...
-
Page 11: Troubleshooting And Maintenance
The fuse has blown Replace the fuse Repeated Hardware failure Contact BT Lab Systems service department fuse broken Check the connections to the power supply and on Electrophoresis leads are not your electrophoresis cell to make sure the connected to the power supply or to connection is intact;... -
Page 12: Encountering Problems
2. Call Technical Service or e-mail to info@BTLabSystems.com 3. If the unit must be shipped back for repair, contact BT Lab Systems or the distributor for a Return Authorization Number and shipping instructions. The unit will be repaired and returned to you as quickly as possible. -
Page 13: Maintenance
Systems within one year following the date of delivery of the product to the customer. TECHNICAL SUPPORT BT Lab Systems offers technical support for all of its products. If you have any questions about the product’s use or, operation, please contact BT Lab Systems at the following info.
Need help?
Do you have a question about the Mini 300 and is the answer not in the manual?
Questions and answers