Sferalabs Exo Sense Pi Quick Reference

Exo Sense Pi Quick Reference
May 2021
Revision 002
ESCB10X Exo Sense Pi
ESCB10E Exo Sense Pi with earthquake sensor
ESCB10X4101008 Exo Sense Pi with CM4 Wireless, 1GB RAM, 8GB eMMC
ESCB10X4102016 Exo Sense Pi with CM4 Wireless, 2GB RAM, 16GB eMMC
ESCB10X4102000 Exo Sense Pi with CM4 Wireless, 2GB RAM, Lite
Be sure to always remove the power supply before installing or
removing the CM4 board inside Exo Sense Pi.
Exo Sense Pi must be operated with the plastic case installed.
Follow all applicable electrical safety standards, guidelines,
specifications and regulations for installation, wiring and operations of
Carefully and fully read this Exo Sense Pi user guide before installation.
Exo Sense Pi is not authorised for use in safety-critical applications where a failure of the
product would reasonably be expected to cause personal injury or death. Safety-critical
applications include, without limitation, life support devices and systems, equipment or
systems for the operation of nuclear facilities and weapons systems. Exo Sense Pi is
neither designed nor intended for use in critical military or aerospace applications or
environments and for automotive applications or environment. Customer acknowledges
and agrees that any such use of Exo Sense Pi is solely at Customer's risk, and that
Customer is solely responsible for compliance with all legal and regulatory requirements in
Sfera Labs S.r.l. may make changes to specifications and product descriptions at any time,
without notice. The product information on the website or materials is subject to change
Iono and Sfera Labs are trademarks of Sfera Labs S.r.l. Other brands and names may be
Exo Sense Pi.
connection with such use.
claimed as the property of others.
Copyright © 2021 Sfera Labs S.r.l. All rights reserved.
http://www.sferalabs.cc
without notice.
Page 1 of 8