Table of Contents
Advertisement
3. Select a corresponding option for the Wake on LAN feature.
4. Press F10 to save the settings and exit.
Use the video output connectors
The video output connectors on the rear of the dock support up to two external displays. The external
displays connected to the dock will not be on until your computer enters the Windows operating system. Do
not use the DisplayPort connector and HDMI connector as shown at the same time. Otherwise, only the
monitor connected to the DisplayPort connector will be on.
Maximum resolutions
Up to 3840 x 2160 pixels / 60 Hz
Note: The maximum resolution might vary depending on the computer.
For the latest maximum display matrix, go to
the dock.
Configure the external displays
You can perform the following configurations for the external displays connected to your dock to meet your
needs:
• Choose a display mode: extend mode, mirror mode, or single-display mode
• Rotate the external displays
• Set the resolution
• Set the color quality
To configure the external displays:
1. Right-click on the desktop and select Display settings.
2. Follow the on-screen instructions to complete the configuration.
For more information, see the Windows help information.
8
ThinkPad Thunderbolt 3 Workstation Dock Gen 2User Guide
230
w
170
w
135
w
65
w
https://www.lenovo.com/support/docks
and select the entry for
Advertisement
Table of Contents
