Chapter 1 Introduction xChime is a plug-in wireless speaker device that directly plugs into standard 120V AC wall outlet and provides audible alerts anywhere in your home when an event of interest happens via a compatible smart home device Features Supports WiFi 5 Wireless Standard.
Page 5
To restore the device to the original factory settings: Reset Pin Hole • Power On • Gently press and hold for over 5 sec then release to restore the device to factory settings. Pairing Button Push the pairing button on the device easily creates an encryption- secured wireless connection automatically.
Chapter 2 Basic Setup This Chapter provides information on how to install the xChime. Installation You must complete the following installation procedure when using the device Step 1. Plug in the xChime to the power outlet 2. Download the Xfinity app from Google Play or App Store 3.
Appendix A Specifications Spec xChime Model xChime Dimensions (without 4 x 2 x 1.7 in (102 x 52 x 44 mm) Prongs) (h x w x d) Color White Power Input Directly plugs into standard power outlets in North America Power Input: 120V, 60Hz, 0.25A Wireless 802.11AC 2 x 2 Dual band selectable, Low Energy Bluetooth 4.1...
Regulatory Approvals Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 9
Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’...