Page 1
Anleitung_BID_710_E_SPK1.qxp:_ 14.07.2011 8:28 Uhr Seite 1 Original operating instructions Impact Drill 710 E Art.-Nr.: 42.590.19 I.-Nr.: 11012...
Page 2
Anleitung_BID_710_E_SPK1.qxp:_ 14.07.2011 8:28 Uhr Seite 2 To avoid damaging the gearbox, the drill / hammer drill selector switch should only be moved when the machine is at a standstill...
Page 3
Anleitung_BID_710_E_SPK1.qxp:_ 14.07.2011 8:28 Uhr Seite 3...
Page 4
Anleitung_BID_710_E_SPK1.qxp:_ 14.07.2011 8:28 Uhr Seite 4...
Page 5
Anleitung_BID_710_E_SPK1.qxp:_ 14.07.2011 8:29 Uhr Seite 11 “Caution - Read the operating instructions to reduce the risk of injury” Wear ear-muffs. The impact of noise can cause damage to hearing. Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! Wear safety goggles.
Anleitung_BID_710_E_SPK1.qxp:_ 14.07.2011 8:29 Uhr Seite 12 IMPORTANT Important! The equipment and packaging material are not When using equipment, a few safety precautions toys. Do not let children play with plastic bags, must be observed to avoid injuries and damage. foils or small parts. There is a danger of Please read the complete operating manual with due swallowing or su ocating! care.
Anleitung_BID_710_E_SPK1.qxp:_ 14.07.2011 8:29 Uhr Seite 13 Sound and vibration Residual risks Even if you use this electric power tool in accordance with instructions, certain residual Sound and vibration values were measured in risks cannot be rules out. The following hazards accordance with EN 60745.
Anleitung_BID_710_E_SPK1.qxp:_ 14.07.2011 8:29 Uhr Seite 14 6.2 Fitting and adjusting the depth stop Select the correct speed: The most suitable (Fig. 4/Item 2) speed depends on the workpiece, the type of use The depth stop (2) is held in place with the locking and the drill bit used.
Anleitung_BID_710_E_SPK1.qxp:_ 14.07.2011 8:29 Uhr Seite 15 7.6 Tips for working with your hammer drill We recommend that you clean the device immediately each time you have finished using it. 7.6.1 Drilling concrete and masonry Clean the equipment regularly with a moist cloth Switch the Drill/Hammer drill selector switch (3) and some soft soap.
The guarantee provided in this Guarantee Certificate is given by Einhell Australia Pty Limited ACN 134 632 858 of 6/166 Wellington Street, Collingwood, Victoria (Telephone number 1300 922 271) (Einhell Express Guarantee). CERTIFICATE GUARANTEE Dear Customer, All of our products undergo strict quality checks. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee certificate.
Page 11
Anleitung_BCD_14_4_2b_SPK1:_ 07.04.2011 8:48 Uhr Seite 72...
Need help?
Do you have a question about the 42.590.19 and is the answer not in the manual?
Questions and answers