Push To Talk; Log - Nokia E Series User Manual

Push to talk

Select Menu Communic. > PTT.
>
Push to talk (PTT) (network service) provides direct
voice communication connected with the push of a key.
With PTT, you can use your device as a walkie-talkie:
one person talks while the others listen through the
built-in loudspeaker. Users take turns responding to
each other. Because only one user can talk at a time,
the maximum duration of a speech turn is limited. For
details of the speech turn duration, contact your
service provider.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.

Log

Select Menu > Log.
Log stores information about the communication
history of the device. The device registers missed and
received calls only if the network supports these
functions, the device is switched on and within the
network service area.
Call and data registers
To view recently missed, received, and dialled calls,
select Recent calls.
56
Tip: To open Dialled numbers
home screen, press the call key.
Cyan Cyan Cyan Cyan
To view the approximate duration of calls to and from
your device, select Call duration.
To view the amount of data transferred during packet
data connections, select
Monitor all communications
To monitor all voice calls, text messages, or data
connections registered by the device, open the general
log tab.
To view detailed information about a communication
event, scroll to it, and press the scroll key.
Tip: Subevents, such as a text message sent in
more than one part and packet data
connections, are logged as one communication
event. Connections to your mailbox, multimedia
messaging centre, or web pages are shown as
packet data connections.
To add the phone number from a communication event
to Contacts, select Options
select to create a new contact or to add the phone
number to an existing contact.
To copy the number, for example to paste it to a text
message, select Options
mapping for 'qtn_dlogs_cmd_copy_number.logs',
locale='en'}.
To view a single type of communication event or
communication events with one other party, select
Options > Filter, and select the desired filter.
when in the
Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
Packet data.
Save to Contacts, and
>
{No display_text
>