Toshiba Encore Mini WT7-C User Manual page 51

A recovery image of the software on your tablet is stored on a dedicated
recovery partition on your tablet, and can be copied to a USB Flash
Memory by using the following steps:
1.
2.
3.
4.
Restoring the pre-installed software from your created
Recovery Media
If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the tablet to the state it was in when you
originally received it. To perform this restoration, follow the steps below:
Make sure that the AC adaptor are connected during the restoring process.
When you reinstall the Windows operating system, the storage space will
be reformatted and all data will be lost.
1.
2.
3.
4.
5.
User's Manual
Do not use on an unstable surface such as a stand.
To connect a USB Flash Memory to the Micro-USB port, you must
purchase a suitable Micro-USB to USB Converter Cable.
USB Flash Memory will be formatted and all the data in the USB Flash
Memory will be lost when proceeding.
Turn on your tablet and allow it to load the Windows operating system
as normal.
Insert the USB Flash Memory into Micro-USB port on your tablet by
using the Micro-USB to USB Converter Cable.
Tap Desktop Assist -> Control Panel -> System and Security ->
Action Center -> Recovery -> Create a recovery drive on the
desktop.
Follow the on-screen instructions to finish creating the Recovery
Media.
Insert the recovery USB Flash Memory into Micro-USB port on your
tablet by using the the Micro-USB to USB Converter Cable.
In the Settings charm, tap Power and then select Shut down.
After completely shut down the tablet, wait for about 10 seconds. Then
hold down the Power button and Volume up button simultaneously
until the Boot menu is loaded.
Use the Volume up and the Volume down button to select the
appropriate option from the menu according to your actual recovery
media and press the Windows button to confirm the selection.
A menu will be displayed from which you should follow the on-screen
instructions.
5-5