Technical Specifications - Harman BSS Soundweb London BLU-102 Installation Manual

10

Technical specifications

FRONT PANEL LED INDICATORS
Other:
ANALOGUE INPUTS:
Mic/Line Inputs:
Input impedance:
Maximum input level:
Frequency Response:
Dynamic Range:
CMRR:
Equiv. Input Noise (EIN):
Phantom power:
A/D Latency:
AEC:
AEC Processing Latency:
Tail Length:
Convergence Rate:
TELEPHONE INTERFACE
AC-REN:
Dynamic Range:
Frequency Response:
THD:
Transhybrid Loss:
LEC Tail Time
TX Level
RX Level
ANALOGUE OUTPUTS:
Maximum Output Level:
Frequency Response:
THD:
Dynamic Range:
Signal Clip, Signal Present, 48V (input only), Off Hook (OH)
Control link status and activity for Ethernet and RS-232
connections (COM); Device configuration status (STAT);
Error (ERR); Power/Locate (PWR)
10 electronically balanced on Phoenix/Combicon
removable screw connectors
Nominal gain 0dB, electronically switchable up to +48dB,
in +6dB steps
3.0kOhm
+20dBu with 0dB input gain, (+8dBu with 12dB gain)
20Hz to 20kHz +/-0.5dB, balanced, 150 ohm
111dB, 20Hz to 20kHz, A-weighted: 108dB unweighted
>75dB at 1kHz
<-125dBu typ. with 150 Ohms source
48V nominal, selectable per input
37/Fs [0.77ms@48k]
Up to 8 channels of AEC processing
2385/Fs [49.69ms@48k]
200 ms
49 dB/s (Average convergence rate)
0.0B
67 dB
300 to 3.3kHz
< 0.3%
> 48 dB with LEC enabled
64ms
-10dBm RMS average
+3.2dBm RMS
8 electronically balanced on Phoenix/Combicon
removable screw connectors
+19dBu
20Hz to 20kHz (+0.5/-1dB)
<0.01% (20Hz to 20kHz, +10dBu output)
108dB typ. (22Hz to 22kHz unweighted)