1. Manuals
  2. Brands
  3. Flipo Manuals
  4. Locks
  5. My Safe Block
  6. Quick start manual

Flipo My Safe Block Quick Start Manual

Hide thumbs
1
2

Advertisement

Table of Contents

My Safe Block Universal Door Blocker is a portable security device that works on most
standard doors with a knob or lever. It is ideal for additional security and privacy in
most residential and commercial doors - hotels, apartments, college dorms, vacation
accommodations and more. To ensure the proper performance of your product, please
read and save these instructions.
Figure A
Locking
Mechanism
(Shown In Unlocked Position.)
Figure C
(Position of strike plate on left side.)

BEFORE FIRST USE

Two adhesive shock absorbing protective pads have been included with your My Safe Block
to protect your door and trim from potential scratches. To apply, peel off the protective
backing from pads and place adhesive side in the positions on the locking mechanism
shown in Figure D.

INSTALLATION

1. Fold the movable locking mechanism into the unlocked position, parallel to My Safe
Block's main body, and slide back toward the handle, (Figure A).
2. My Safe Block has a metal tab bent at a 90-degree angle located at the end furthest from
the handle. Open the door you wish to protect and insert the tab completely into the your
door jam's strike plate. For doors with the strike plate to the right, point the tab to the right
and position it at the bottom of the strike plate, (Figure B). For doors with the strike plate
to the left, point the tab to the left and position it at the top of the strike plate, (Figure C).
T HE UNIV E RS AL DO O R B LO CKE R!
Figure B
Figure D
(Installed & In Locked Position)
(Position of strike plate on right side.)
Figure E
Protective
Pad
Placement
(Installed & In Locked Position)
Protective Pad
Placement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the My Safe Block and is the answer not in the manual?

Questions and answers

Summary of Contents for Flipo My Safe Block

  • Page 1 Block’s main body, and slide back toward the handle, (Figure A). 2. My Safe Block has a metal tab bent at a 90-degree angle located at the end furthest from the handle. Open the door you wish to protect and insert the tab completely into the your door jam’s strike plate.
  • Page 2 1. My Safe Block works with most standard residential and commercial doors with a knob/ lever, bolt/latch, face plate and strike plate. 2. My Safe Block is intended for doors without lock or deadbolt but can always be used as “back-up” protection for doors with locks and deadbolts. Always use a door’s integrated locking system when possible as its primary lock method.

Table of Contents