Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Ventus Manuals
  4. Cutter
  5. VC-550
  6. Instruction manual

Ventus VC-550 Instruction Manual

Vegetable cutter machine
Hide thumbs

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Original instructions for
VEGETABLE CUTTER MACHINE
VC-550 / VC-750
Keep these instructions with the appliance.
You should read this user manual carefully before using the appliance.

Advertisement

loading
Need help?

Need help?

Do you have a question about the VC-550 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ventus VC-550

  • Page 1 INSTRUCTION MANUAL Original instructions for VEGETABLE CUTTER MACHINE VC-550 / VC-750 Keep these instructions with the appliance. You should read this user manual carefully before using the appliance.
  • Page 2 1.3 The machine is intended for commercial and indoor use by trained and skilled personnel familiar with these instructions. VC-550/VC-750. The assortment is made up of 2 different sizes: The machine body is built in aluminum and stainless steel for easy cleaning and maintenance.
  • Page 3 persons in order to avoid danger or injury. 2.1.11 Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. To pull the plug out of the socket, always pull on the plug and not on the cord.

  • Page 4: Product Description

    2.2.6 Caution! Securely route the power cord if necessary, in order to prevent unintentional tripping over and falling. 2.2.7 Do not use the appliance before it is properly assembled. 2.2.8 This appliance is not intended to be operated by means of an external timer or separate remote-control system.

  • Page 5: Main Technical Parameters

    7. Hopper lid spindle 3.2 MAIN TECHNICAL PARAMETERS Unit: mm MODEL POWER VOLTAGE N.W./G.W. PACKING SIZE 220V-240V~ VC-550 550W 24.2/27.2kg 65*31.5*53.5cm 50/60Hz 115V~ 60Hz VC-750 750W 24.9/28.2kg 65*32.5*53.5cm 380V~ 50Hz 4 INTRODUCTION Preparation for first use 4.1.1 Check to make sure the appliance is undamaged. In case of any damage, contact your supplier immediately and do NOT use the appliance.

  • Page 6: Installation

    4.2 The manufacturer will be not responsible for following cases: 4.2.1 If the machine is tampered or safety functions are installed by non-authorized staff. 4.2.2 If the components are replaced by unauthorized parts. 4.2.3 If the instruction in this manual is not carefully followed. 4.2.4 If the machine surfaces are treated with unsuitable substance or solvent.
  • Page 7 4.4.3 Electric connection DANGER-CAUTION: Electric connection to the power outlet should be operated by skilled personnel. Check for the perfect efficiency of the plant grounding system. Make sure that the line voltage (V) and frequency (Hz) correspond to the machine ratings (refer to the machine identification plate and wiring diagram).
  • Page 8 4.5.3 Choice of discs DISC CHOICE FORVEGETABLE CUTTER MACHINE PICTURE PART NO. SIZE G002 G003 G005 4.5mm Shredding G007 G010 10mm SA002 2mm (three blades) SA004 4mm (two blades) SA006 6mm (two blades) Slicer (aluminum) SA008 8mm (single blade) SA010 10mm (single blade) SP002 2mm (three blades)
  • Page 9 4.5.4.1.3 Turn the disc clockwise to insert the bayonet and keep on turning clockwise until it reaches the pin. 4.5.4.1.4 To remove the disc, turn it in the opposite direction and lift it using the finger holes at the edges of the disc. 4.5.4.1.5 Close and lock the cover and handle.
  • Page 10 in spray cylinders for easy application, make aluminum surfaces glossy and prevent moisture and corrosion. 4.7.3 To protect the appliance from dust, cover it with a cloth that allows air circulation inside the appliance. Circuit diagram 110V~ 60Hz 230V~ 50Hz 380V~ 50Hz Exploded view and spare parts lists...
  • Page 11 VC-550...
  • Page 12 VC-750...

This manual is also suitable for:

Vc-750