Table of Contents
Advertisement
Using Special Options
You can customize the programmes by using the
following special options:
Steam
Adding this option helps provide better cleaning
results.
TurboWash
Adding this option reduces the programme time
but the similar washing results will be provided.
Follow the next steps to use a special
option.
1
Press the Power button.
2
Select a washing programme.
3
Change the washing programme (Temp. or
Spin) as necessary.
4
Press Steam or TurboWash button.
5
Press the Start/Pause button.
Using Basic Options
You can customize the programmes by using the
following basic options:
Add Item
You can use this option in order to add or remove
clothes after the washing programme has started.
1
Press the Power button.
2
Select a washing programme.
3
Press the Start/Pause button.
4
Press the Add Item button as necessary.
5
Open the door after it unlocks itself and add or
remove necessary clothing items.
6
Close the door and press the Start/Pause
button.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature inside of
the drum is high. It is not possible to add clothes
at this time.
Time Delay
You can set this function so that the appliance
starts automatically and finishes after a specified
time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Time Delay button as necessary.
4
Press the Start/Pause button.
NOTE
• Except for LED of the Time Delay button, all LEDs
on the control panel will be turned off within 20
minutes. This feature may vary depending on
the model purchased.
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, clothes
and other factors.
• To cancel the function, the Power button should
be pressed.
• Avoid using liquid detergent for this function.
OPERATION
31
Advertisement
Table of Contents
