MuxLab 500769-RM Quick Installation Manual

Hdmi 2.0 digital signage media player

Advertisement

Specifications

Specifications
Environment
HDMI 2.0
Devices
TVs, monitors, projectors supporting HDMI.
Signal Protocol/Standard
HDMI 2.0 and HDCP 2.2
Video Bandwidth
594MHz
Network Bandwidth
Up to 32Mbps (max)
Latency
200ms (in low latency mode)
Protocols
Supports Multicast, RTSP, HLS, FLV & TS
Connectors
One (1) HDMI output connector for AV.
One (1) RJ45S for Ethernet connection.
One (1) USB connector for local AV content storage via external USB drive.
One (1) TosLink optical connector for digital audio extraction.
One (1) 3.5mm output connector for 2CH audio extraction.
One (1) 3.5mm connector for directional IR (direction controllable via software).
One (1) RS232 DB9 connector for controlling end devices.
One (1) 2.1mm locking power connector.
Maximum Distance
Cat5e/6: 330ft (100m) from Ethernet Switch. Unlimited over the Internet
Note: When installed in an electrically noisy environment, an STP cable must
be used. Also, cross-connection reduces the effective distance depending on
the grade of twisted cable used.
RJ45 Pin Configuration
RJ45 Link
Pin 1 (R)
Pin 2 (T)
Reverse Polarity Sensitive.
Pin 3 (R)
Pin 6 (T)
Use EIA/TIA 568A or 586B
Pin 4 (R)
Pin 5 (T)
straight-through wiring.
Pin 7 (R)
Pin 8 (T)
Power Source
This device supports PoE (PD), an external power supply is not included. It is
intended to be powered via a PoE (PSE) Ethernet Switch. If required, an
optional power supply (500993) may be purchased separately.
PoE
IEEE 802.3af
USB Port
USB 3.0 FAT32 file system
Power Consumption
4.5W
Temperature
Operating: 0° to 40°C
Humidity: Up to 95% non-condensing
4.4" x 3.6" x 1.0" (111mm x 92mm x 25mm)
Dimensions
Weight
0.9lbs (0.4kg)
Compliance
Regulatory: FCC, CE, RoHS
Warranty
3 years
Order Information
500769-RM
Compatibility
500769, 500762-TX, 500763-TX, and compliant H.264/H.265 Transmitters
Accessories
500920 16-Port Rackmount Transceiver Chassis
(These items are sold
500917 Wall Mount Transceiver Bracket Kit
separately)
500990 IR Emitter, and 500994 IR Sensor
500993 Univ. Locking Power Supply 5VDC/2.6A US/UK/EU Blade
2321 Rue Cohen, Montreal, Quebec, Canada, H4R 2N7
Tel: (514) 905-0588
Toll Free (North America): (877) 689-5228
E-mail:
info@muxlab.com
© MuxLab Inc.
Storage: -20° to 85°C
Flammability: 94V0
HDMI 2.0 Digital Signage Media Player (Rack Mount)
Fax: (514) 905-0589
URL: www.muxlab.com
94-000908-A SE-000908-A
HDMI 2.0 Digital Signage Media Player (500769-RM)
Quick Installation Guide

Overview

The 500769-RM HDMI 2.0 Digital Signage Media Player - Rack Mount version is a digital signage
player capable of receiving multiple H.264/H.265 AV content simultaneously up to 4K/60 (4:4:4)
from a local network, the Internet, internal memory or external USB memory devices, and supports
multiview capability and scheduling to automatically deliver this customized windowed AV
content based on a weekly schedule. Multiple video, audio and image file formats are supported.
The digital signage player is able to up-scale 1080p@60Hz video to 4K@60Hz (4:4:4) and delivers
content to a display or to another MuxLab AV over IP transmitter to support virtual matrix and
video wall configurations.
The exceptionally low bandwidth requirements of this device allows it to accept streaming
audio/video content over a local network and over the Internet for distributed installations spread-
out throughout the globe.
The digital signage player may be extended up to 100m from the Ethernet switch over CAT5/6
cable, and supports PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
The MuxLab Digisign CMS (Content Management System) Windows, iOS and Android software
application is available to simplify the configuration and utilization of the 500769-RM. Digisign
may be run on a PC/Laptop, iOS smartphone and tablet, and Android smartphone and tablet.

Applications

Applications include digital signage / media player, audio/video streaming over LAN and Internet,
commercial and residential AV systems, corporate lobbies, malls and boutiques, airports,
subway/train/bus stations, etc.

Installation

1.
Connect the player to the HDMI display equipment with an HDMI compliant cable, or alternatively
connect the Player to an AV over IP Transmitter to be able to connect to multiple AV over IP
Receivers and/or video walls, and turn on the Display equipment.
2.
Using a CAT5/6 cable connect the Ethernet port of the player to a PoE Ethernet switch. The Power
LED will turn blue and the unit will start up, taking about 60 seconds to finalize the boot sequence.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 500769-RM and is the answer not in the manual?

Questions and answers

Summary of Contents for MuxLab 500769-RM

  • Page 1 Also, cross-connection reduces the effective distance depending on Overview the grade of twisted cable used. The 500769-RM HDMI 2.0 Digital Signage Media Player - Rack Mount version is a digital signage RJ45 Pin Configuration RJ45 Link player capable of receiving multiple H.264/H.265 AV content simultaneously up to 4K/60 (4:4:4)
  • Page 2 The unit is configured in DHCP mode by default, and will be assigned an IP address if your network has a DHCP server. If no DHCP server is available on the network, the 500769-RM will default to the Static IP address: 192.168.168.63.

Table of Contents