LG WM6500H A Series Owner's Manual page 27

en-us_main.book.book Page 27 Wednesday, November 16, 2022 4:12 PM
Cleaning the Drain Pump Filter
The washer fails to drain if the drain pump filter is
clogged. Periodically clean the drain filter to
prevent clogging with foreign objects.
WARNING
• Opening the drain filter will result in water
overflowing if there is water in the drum. Use a
bucket if the drum is not completely drained
before you open the drain filter.
• Using the washer without the drain filter or with
an incorrectly assembled drain filter may cause
leaks or malfunction of the washer.
1
Turn off the washer, and unplug the power
cord.
2
Open the drain pump filter cover.
3
Drain any remaining water.
• Unclip the drain hose and remove the plug
from the drain hose to drain the remaining
water.
4
Remove the pump filter.
• Twist the pump filter counterclockwise to
remove.
5
Clean the pump filter and opening.
6
Reassemble the plug onto the drain hose and
reclip the drain hose.
7
Insert the drain pump filter and twist it
clockwise.
8
Close the drain pump filter cover.
NOTE
• A Drainage message appears on the display
when the drain pump filter is clogged with dirt.
Clean the drain pump filter.
MAINTENANCE 27