Advertisement
Quick Links
Advertisement
Summary of Contents for Netro PIXIE-Z1
- Page 1 PIXIE-Z1 The Smart Hose Faucet Timer Quick start guide - English -...
- Page 3 Meet Pixie-Z1, the Smart Hose Faucet Timer Hose Faucet Connection Outlet LED Light Button Battery...
- Page 4 Launch the Netro app. Create a Netro account or login with an existing Netro account to start setting up the Pixie-Z1 timer. First add the Netro Zigbee Hub to your Netro account and then add the Pixie-Z1 timer through the Netro app. If you are using other Netro...
- Page 5 Setup the Pixie-Z1 timer in the App Put two AA alkaline batteries into the battery socket and insert the battery socket into the Pixie-Z1 timer. The LED light will start to blink in white color. (If not, press and hold the power button for 5 seconds to reset the timer to factory settings）...
- Page 6 Wait three minutes, the zigbee signal strength will be displayed on the app, then refresh the home page of the Netro app and check the signal strength of the timer. If the WiFi signal is less than one bar, you need to move the Hub closer to the timer or remove the obstacles.
-
Page 7: Weather Data
Weather Data Once your Pixie-Z1 is added to your account through the Netro app, the Netro cloud server automatically acquires the local weather data for adjusting the watering schedules. - Change providers By default, your Pixie-Z1 is connected to NetroWeather for weather data. - Page 8 Smart Zone Your Pixie-Z1 optimizes the watering schedules based on weather conditions and watering regulations. You can select the Smart level for each zone in the Netro app -> Settings -> Garden -> Smart Zone. - Advanced: Your Pixie-Z1 automatically creates smart watering schedules based on moisture level and watering regulations.
- Page 9 Two AA alkaline batteries can generally provide 6 months of normal operation. What if the battery on the Pixie-Z1 runs out? The timer will stop functioning. When you press the power button twice quickly, the LED light will flash in red indicating low battery. You can remove...
- Page 10 (in its HOST mode). Flashing red quickly five times: press and hold the button for five seconds to reset the Pixie-Z1, the Pixie-Z1 will flash red quickly five times, then start to blink in white. Flashing red quickly twice: the Pixie-Z1 is unable to connect to the paired Hub.
- Page 11 Button Button on the Pixie-Z1: Short press: quickly press the button once to pair the Pixie-Z1 with the Hub to add the Pixie-Z1 to your account through the Netro app. Double press: power on/off the Pixie-Z1. Long press: press and hold the button for five seconds to reset the...
- Page 12 visit netrohome.com/shop/help_center support@netrohome.com FCC Compliance Notice and other legal information: visit netrohome.com Timer dimensions: 6.5 X 4.3 X 1.9 (inches) Weight: 14.3 oz / 406 g WiFi: 802.11 N, 2.4Ghz, US / Japan / EU Operating temperature range: 32° to 122℉ / 0℃ to 50℃ Water pressure: 0.02MPa to 0.8Mpa -10-...
- Page 13 -11-...
Need help?
Do you have a question about the PIXIE-Z1 and is the answer not in the manual?
Questions and answers