Advertisement
Before You Get Started
1. Only install the router once you receive confirmation from us that your line has been
activated by your Fibre provider. We'll notify you via email and SMS. If your Fibre box is
active, you will see that the connection light is on.
2. It's important to follow the instructions below using the device (computer or phone) you
have chosen to set up the router with at all times. Do not switch to another device during
the set-up process.
1
CONNECT YOUR MIKROTIK ROUTER
Power it up by plugging in the power supply into the back of MikroTik router. Link the
MikroTik router to the Fibre box using the network cable supplied, plug into Port 1 on both
devices (the MikroTik one is labeled: Internet/PoE in).
2
CONNECT YOUR DEVICE TO THE ROUTER
Wi-Fi Option:
Using your phone or laptop – go to Wi-Fi settings and connect to the Wi-Fi network
called "MikroTik".
NB: IF THE WI-FI NETWORK DISPLAYED IS ANYTHING ELSE BUT "MikroTik" E.G.: HAS
NUMBERS AT THE END (MikroTik123*** ) PLEASE DISCONTINUE THE SET UP AND CALL
OUR SUPPORT CENTRE ON 087 805 0530 FOR FURTHER ASSISTANCE.
Cable Option:
Plug a network cable into any of the free ports (2-5) on the router and connect it to your
PC or laptop.
Visit us at vox.co.za
Installation Guide - Pg 1
Advertisement
