Table of Contents
Advertisement
Installation
STEP 2 Spacing (applicable models only)
NOTE
The number of provided spacers varies on the model. Attach all the provided spacers.
A
B
STEP 3 Flooring
32
English
Untitled-1 32
1. Open the door and locate the provided
spacer (Gray block).
2. Unpack the spacer and attach it to the
rear of the refrigerator as shown. They
help ventilate air to the rear wall and
save power consumption.
3. Attach the provided spacer (A, sponge)
and the spacer (B, sponge) as shown in
the figure for optimal energy efficiency.
CAUTION
• If the refrigerator is not flush with
the cabinet, you may cut the spacers
to make the refrigerator flush with
the cabinet, but the optimal energy
efficiency cannot be guaranteed.
• Make sure the attached spacer(s) contact
the wall when you put the refrigerator
into the installation site.
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each foot of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpet along the movement path.
2022-12-13
2:28:02
Advertisement
Table of Contents
