Panasonic TX-32ES600E Ehelp page 268

Service Replacement
Set to On to display a message to switch to the available service (only
available in some countries).
Watching > Tuning and editing channels > Other settings
Signal Condition
Checks the signal condition.
Watching > Tuning and editing channels > Signal Condition
Antenna System
Sets the antenna system to use plural LNBs for receiving several satellites.
Watching > Tuning and editing channels > Auto Setup
LNB Configuration
Selects the satellite for each LNB.
Watching > Tuning and editing channels > Auto Setup
Attenuator
Automatically reduces the DVB-C signal to avoid the interference.
Watching > Tuning and editing channels > Other settings
Add TV Signal
Adds the TV mode.
Watching > Tuning and editing channels > Other settings
= Note =
The settings in Tuning Menu
●
The menu name varies depending on the TV mode.
/ DVB-C Tuning Menu
Analogue Tuning
are applicable only for the selected TV mode.
/ DVB-T Tuning Menu
Menu)
- 268 -
(DVB-S Tuning Menu
/ DVB-via-IP Tuning Menu /