Pelican HeadsUp Lite 2600 - Headlamp Manual

Pelican HeadsUp Lite 2600 - Headlamp Manual

Advertisement

Pelican HeadsUp Lite 2600 - Headlamp Manual

BATTERY INSTRUCTIONS

  1. Remove the left cap (light pointing away from you) by turning counter-clockwise exposing the battery compartment.
  2. Remove used batteries and replace with fresh batteries (as shown on polarity sticker located on inside of body).
  3. Place cap with side slot over locking projections in body. Screw down clockwise until cap is snug with body.

ON/OFF

To turn on the HeadsUp LiteTM (light pointing away from you) turn the right side cap towards you. To turn off, turn the cap away from you.

LAMP REPLACEMENT

.75 /.50 AMP (spare lamp included)

  1. Remove lens and reflector housing by turning counter-clockwise.
  2. Remove the lamp by pulling straight up out of lamp socket.
  3. Install fresh lamp by pushing into socket until fully seated.
  4. Replace lens housing squarely on threads and turn clockwise while pressing on the lens housing slightly.

NOTE: A spare lamp is located next to the lamp socket, the lamp is.50 amps when a dimmer light is required, or maybe used as backup.

FOCUS ADJUSTMENT

To focus shine the light on a light colored background, approximately 10 feet away and turn lens all the way onto the threads until lens bottoms out. Back off lens slowly until focus occurs.

HEADLAMP POSITIONING

A stretchable band is provided for mounting around your head. The light can be rotated up and down through 170˚


If light is not to be used for some time, remove batteries to prevent possible leakage and corrosion.

PRODUCT SPECIFICATIONS

Lamp Type: High (0.75 amp)
Low (0.50 amp)
Battery Type: E91 1.5V Alkaline AA-cell (4)


Explosion Hazard - Batteries must only be changed in non-hazardous locations.


Explosion Hazard - Substitution of components may impair suitability for use in hazardous locations.

REPLACEMENT PARTS

CAT# DESCRIPTION
2601 3 pc. O-ring set
2604LM Low Intensity 0.5 amp lamp
2605LM High Intensity 0.75 amp lamp
2606 Rubber Head Strap
2607 Cloth Head Strap


READ THIS NOTICE BEFORE USE.
Observe battery polarity labels on inside of this light. DO NOT deviate from the correct label polarity. DO NOT MIX BRANDS. DO NOT MIX old and new batteries.
Always replace all batteries with new alkaline batteries.

FAILURE TO COMPLY WITH ABOVE WARNING COULD CAUSE SERIOUS INJURY.

WARRANTY RETURN POLICY

Send all items for repair or replacement directly to Pelican Products Customer Service Department (postage paid). Please call for a return authorization number. Per our guarantee, Pelican Products will replace or repair any broken or defective products. Upon receipt of goods, Pelican Products will notify you of any handling and return postage charges. If your local retailer does not stock the above accessory parts, you may order them directly from Pelican Products. Send check or money order in U.S. dollars, or order by phone using MasterCard or VISA (ask for Customer Service). SORRY, NO C.O.D.'s. Subject to sales tax. Allow 2-3 weeks delivery time. Pelican Products pays postage and handling charges.

PELICAN
23215 Early Ave. • Torrance, CA 90505 USA
Tel (310) 326-4700 • FAX (310) 326-3311
www.pelican.com

PELICANTM CANADA
10221-184 St. • Edmonton, Alberta T5S 2J4
Tel (780) 481-6076 • FAX (780) 481-9586

PELITM PRODUCTS, S.L.U.
c/ Casp, 33-B Pral. • 08010 • Barcelona, Spain
Tel (+34) 93.467.4999 • FAX (+34) 93.487.7393 www.peli.com

All trademarks are registered and/or unregistered trademarks of Pelican Products, Inc., its subsidiaries and/or affiliates.
© 2010 Pelican Products

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Pelican HeadsUp Lite 2600 - Headlamp Manual

Advertisement

Need help?

Need help?

Do you have a question about the HeadsUp Lite 2600 and is the answer not in the manual?

Questions and answers

Table of Contents