Pair Your Remote Control To The Tv; Voice Search - Philips OLED708 Series User Manual

Bottom
1Â -Â  (TV Guide) /(LIST)
To open or close the TV Guide. Long press to open
the channel list.
2Â -Â  (Volume)
Press + or - to adjust the volume level.
3Â -Â Number keys
To select a channel directly.
4Â -Â AD
To access the Audio Description and toggle to switch
on and off.
5Â -Â  ( Channel)
Press + or - to switch to the next or previous channel
in the channel list. To open the next or previous page
in Text/Teletext.
6 -Â  ( Mute)
To mute the sound or to restore it.
7Â -Â  (DASHBOARD)
To launch Dashboard on the side of the screen to
access Settings, device controls, notifications and
more.
4.2
Pair Your Remote Control to
the TV
This remote control uses both Bluetooth® and IR
(infrared) to send its commands to the TV.
• You can use this remote control via IR (infrared)
for most operations.
• To use advanced features like voice search, you
need to pair (link) the TV with the remote control.
When you start the initial TV installation, the TV
invites you to press the Home + Back key to pair with
the remote control. It is best to complete the pairing
when you first install the TV.
Note:Â
1 - Once the remote control has entered pairing
mode successfully, the LED indicator ring around the
microphone on the front side of the remote control
starts blinking.
2 - The remote control must be kept close to the
TV (within 3 feet) during pairing in order to ensure
success.
3 - If the TV does not launch the voice control
field when you press  , pairing was unsuccessful.
4 - It is advisable to wait until the set has fully started
up and launched all background processes before
pairing mode is entered as the toast message
containing further instructions may appear too late,
thereby negatively impacting the pairing procedure.
Pairing or pairing again
If the pairing with the remote control was lost, you
can pair the TV with the remote control again.
You can press the Home + Back key or long press the
PAIR (SOURCES) key (for about 3Â seconds) for
pairing.
Alternatively, go to  Settings > Remote &
accessories > Remote control settings > Pair
remote control, then follow the on-screen
instructions.Â
A message appears when the pairing has been
successful.
Remote Control Software
 Settings > Remote &
accessories > Remote control settings
>Â Remote control info
Once the remote control is paired, you can check the
current remote control software version.
 Settings > Remote & accessories > R
emote control settings >Â Update remote control
software
Check available remote control software for updates.
4.3

Voice Search

You can search for videos, music or anything else on
the Internet by simply using your voice. You can
speak into the microphone on the remote control.
You need to pair the remote control to the TV before
use voice search.
To use Voice:
1 - Press and hold the  key on the remote
control;Â the blue light on the remote control lights
11