Operating Instructions
Busch-AudioWorld
Pos: 39 /#Neustruktur#/Online-Dokumentation (+KNX)/Montage/alle Geräte/Montagehinweise - Allgemein @ 33\mod_1360846993155_15.docx @ 277666 @ 2222222 @ 1
6.3
General mounting instructions
•
Terminate all branches of the wiring system via a connected bus device (e.g., indoor station, outdoor station,
system device).
•
Do not install the system controller directly next to the bell transformer and other power supplies (to avoid
interference).
•
Do not install the lines of the system bus together with 230 V- lines.
•
Do not use common cables for the connecting wires of the door openers and wires of the system bus.
•
Avoid bridges between different cable types.
•
Use only two wires for the system bus in a four-core or multi-core cable.
•
When looping, never install the incoming and outgoing bus inside the same cable.
•
Never install the internal and external bus inside the same cable.
Pos: 40 /#Neustruktur#/Online-Dokumentation (+KNX)/Montage/AudioVideo/Montage - 8211/Montage - 8211/8212 @ 22\mod_1332491175512_15.docx @ 205743 @ 2 @ 1
Fig. 3:
Installation
1. Connect the cables to the flush-mounted insert.
2. Mount the flush-mounted-insert.
3. Plug the cover plate together with the frame onto the flush-mounted insert (see illustration).
Pos: 41 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ 12222 @ 1
Operating Instructions | 1473-1-8364
®
Installation and electrical
connection
— 9 —