Connecting To Your Tv - Samsung HW-K551 User Manual

5. While the subwoofer's indicator is flashing blue, press the
side of Soundbar main unit to turn on the Soundbar main unit.
6. The connection is complete if the indicator on the front of the subwoofer stops flashing and glows
continuously.
c If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.
Expand to true wireless surround sound by connecting the Samsung Wireless Rear
Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)
c For further information, refer to the Web Manual.

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
c Important: Before you begin, put the battery into the remote. See page 13 for instructions.
Method 1. Connecting with a Cable
Check the HDMI OUT (TV-ARC)
port of the Soundbar main unit.
HDMI OUT
(TV-ARC)
Bottom of Soundbar
1. Connect the HDMI cable (not supplied) as in the picture above.
2. TV ARC appears on display of the product and TV sound is output.
c If TV sound is not output, press the
on the remote control to select the D.IN mode on Soundbar main unit display. Then, the D.IN mode is
changed to TV ARC and TV sound is output.
c If the Soundbar main unit display does not change to TV ARC, check the cable connections.
c You can conveniently control the volume of the Soundbar and interlock power supply.
button on your remote control or on the right
HDMI Cable
(not supplied)
HDMI IN
(TV-ARC)
Check the (TV-ARC) at
HDMI IN port of your TV.
TV ARC
button on the right side of your Soundbar or the SOURCE button
· 5 · English
Soundbar