Summary of Contents for MasterForce 245-1682
- Page 1 26" Tool Cart Actual product may differ slightly from image shown. Model #: 245-1682 OPERATOR’S MANUAL CAUTION: To reduce the risk of injury, user must read and understand operator’s manual. Save these instructions for future reference.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety Symbols ................. 2 Safety Instructions ..............3 Parts List ................... 4 Assembly and Operation ............5 Maintenance and Safety ............7 Page 1... -
Page 3: Safety Symbols
SAFETY SYMBOLS Model #: _______________________________ CAUTION: Place of purchase: ______________________ 1. Read and follow all safety and assembly instructions before using this product for the first time. Date of purchase: _______________________ 2. Fill in the following information and retain the manual for future reference: Receipt # of purchase: __________________ Do not open more than one drawer at a time. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract our attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understand- ing. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures. -
Page 5: Parts List
PARTS LIST For service regarding parts, assembly or warranty information, please call 1-800-459-4409. The keys are taped to the top of the caster carton, which is placed in the bottom tray of the cart. NOTE: Replacement keys may be ordered, Ref# Description Part#... -
Page 6: Assembly And Operation
ASSEMBLY AND OPERATION NECESSARY TOOLS REQUIRED INSTALL BOTTOM TRAY FOR ASSEMBLY Carefully turn the cart upside down and lay • 10 mm socket (for side handle) its top on to a protective surface. Position • 14 mm socket the bottom tray over the bottoms of the pillars. - Page 7 ASSEMBLY AND OPERATION INSTALL SIDE HANDLE TO REMOVE DRAWERS Position the side handle over the holes Pull the drawer out so it is almost fully in the upper part of the tool cart and at- extended. PUSH UP on the black release tach with four (4) M6x12 hex bolts.
-
Page 8: Maintenance And Safety
MAINTENANCE AND SAFETY MAINTENANCE WARNING: DO NOT stand on this product or lean on the drawers. For casters, use high quality bearing grease (annually/yearly). WARNING: WEAR SAFETY Lubricate the slides (twice a year) with GLASSES when removing or repositioning a product like WD40 or other quality the slides. - Page 9 NOTES Page 8...
- Page 10 NOTES Page 9...
- Page 11 26" Tool Cart LIMITED LIFETIME WARRANTY MASTERFORCE Tool Cabinets and Chests have been manufactured to the ® highest standards of quality and workmanship and are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product.
- Page 12 ©2018 Menard, Inc., Eau Claire, WI 54703 01/2019...
Need help?
Do you have a question about the 245-1682 and is the answer not in the manual?
Questions and answers