LG XBOOMGo PL2B Owner's Manual page 20

20 Operating
,
Note
y When you use Dual Mode, the multi phone
pairing connection is not supported. Press 3
DUAL button to cancel Dual Mode.
y You can connect this unit with up to 2
Bluetooth devices simultaneously by using
the same method as described on the previous
page. If you want to connect new Bluetooth
device with 2 Bluetooth devices connected,
2 press and hold j button for 2 seconds.
y When the speaker is in the multi phone pairing
mode, you will need to connect the other
Bluetooth device and speaker within a few
minutes (Approx. 1 minute). Otherwise multi
phone pairing mode will be canceled.
y Multi phone pairing connection may not be
supported depending on the connected device's
specifications.
y Removable/detachable Bluetooth device (Ex
:Dongle etc..) doesn't support multi phone
pairing.
y Even if this speaker is connected with up to 2
Bluetooth devices, you cannot play and control
music on both Bluetooth devices at same time.
Stop the music if you want to play the other
Bluetooth.
y After multi-pairing connection, it takes a little
time for the music to be played depending on
the Bluetooth devices.
y In case of multi phone pairing, automatically
connection of 2 Bluetooth devices is not
supported. Only one Bluetooth device will be
automatically connected to the speaker. The
other device should be connected manually.
y If you get out of Bluetooth's effective distance
without disconnecting Bluetooth, it may take
a few minutes to connect other Bluetooth
devices. But after power off and on, you can
connect other Bluetooth devices without
waiting.
y If you try to pair a new Bluetooth device when
it is already connected to 2 Bluetooth devices,
this speaker automatically disconnects one
Bluetooth device. (The Bluetooth device in use
is excluded from disconnection.)
y In case of multi-pairing, only one Bluetooth
device that has control can use voice command.