Norco 72045 Setup, Operating, Maintenance Instructions

MODEL 72045 TRUCK DISC BRAKE HUB HANDLER
SETUP • OPERATING • MAINTENANCE INSTRUCTIONS
Note: Revision letters (A, B, C, D etc.) after model numbers have been omitted as they do not affect the setup,
operating and maintenance instructions of a particular jack unless otherwise noted.
IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING
BEFORE USING THIS HUB HANDLER, READ THIS MANUAL
COMPLETELY AND THOROUGHLY, UNDERSTAND THEIR
OPERATING PROCEDURES, SAFETY WARNINGS
MAINTENANCE REQUIREMENTS. FAILURE TO DO SO
COULD CAUSE ACCIDENTS RESULTING IN SERIOUS OR
FATAL PERSONAL INJURY AND/OR PROPERTY DAMAGE.
The use of hub handlers is subject to certain hazards that cannot
be prevented by mechanical means, but only by the exercise of
intelligence, care, and common sense. It is therefore essential to
have owners and personnel involved in the use and operation of
equipment who are careful, competent, trained, and qualified in
the safe operation of the equipment and its proper use. Examples
of hazards are dropping, tipping, or slipping of loads caused
primarily by improperly securing loads, overloading, off-centered
loads, use on other than a hard level surface, and using equipment
for a purpose for which it was not designed.
• Inspect the hub handler before each use. Do not use the hub
handler if it is damaged, altered, modified, in poor condition, or
has loose or missing hardware or components. Take corrective
action before using the hub handler.
• Use only on a hard level surface.
• Stay out from underneath a load that is being lifted or
suspended.
PROFESSIONAL LIFTING EQUIPMENT
It is the responsibility of the owner to make sure all personnel read
these manuals prior to using this device. It is also the responsibility
AND of the device owner to keep these manuals intact and in a convenient
location for all to see and read. If the manuals are lost or not
legible, contact Norco Industries, Inc. for free replacements. If the
operator is not fluent in English, the product and safety instructions
shall be read to and discussed with the operator in the operator's
native language by the purchaser/owner or his designee, making
sure that the operator comprehends its contents.
This product is covered by a Limited Lifetime Warranty. For details
see the back cover of Norco's product catalog.
WARNING
• Apply load as close to the vertical portion of the lifting member
as possible.
• Before moving the load, assure that the load is centered and
secured with the load restraint device provided.
• Before moving, lower the load to the lowest possible point.
• No alterations or modifications shall be made to this product.

SETUP

®
WARRANTY