Summary of Contents for BSEED S8E
- Page 1 6”Smart Control Panel(in-wall) SPEC Ver. Description Creator Date First edition Engineer Department V1.0 2021-9-18...
-
Page 2: Table Of Contents
Contents Chapter 1 Product presentations............3 1.1 Appearance................3 Chapter 2 Product Specifications............4 PX30 Quad core Cortex-A35............4 Chapter 3 Ports and Specifications........... 5 3.1 Interface and ports.............5-6 3.2 Specifications................7 Chapter 4 Installation instructions............ 8 4.1 Installation drawings..............9 4.2 Wires connection drawing..........11 Chapter 5 Operation guideline ............ -
Page 3: Chapter 1 Product Presentations
Chapter 1 Product presentation 1.1 Appearance 1.2 Main Features ● Compatible with Chinese | Southeast Asia standard wall boxes, simple in wall installation. ● 6-inch HD LCD, IPS, multi touch screen, quadruple microphone with noise reduction, Auto light sensor, built in 1W speaker. -
Page 4: Chapter 2 Product Specifications
Chapter 2 Product Specifications Specification Android 8.1 PX30 Quad core Cortex-A35 Screen Main Screen - 720*1440 Multi-touch ; Knob Screen 240*204 Multi-touch Bluetooth BLE4.2 Single point Ethernet 10M/100M Adaptive Half-duplex 3.81mm RS485 Ethernet terminals 802.11b/g/n 150Mbps 802.15.4 PHY/MAC Zigbee WiFi Zigbee 2.4GHz network protocol stack... -
Page 5: Chapter 3 Ports And Specifications
One Smart Control Panel could control all your smart switches, smart plugs, lights, air conditioners, curtains, locks, security cameras, smart sensors,up to 100+ ZigBee sub devices. Chapter 3 Ports and Specifications 3.1 Interface and ports... -
Page 7: Specifications
3.2 Specifications Item Specifications Power 100~240VAC,50/60Hz Wireless Wi-Fi,Bluetooth,Zigbee Protocols Working 0℃~40℃ Temperature Working 5%~90%RH Non-condensing Humidity 205.6x85.6x10mm (without the base) Product dimensions 205.6x85.6x52mm (with the base) Net weight 310g... -
Page 8: Chapter 4 Installation Instructions
Chapter 4 Installation instructions ● Turn off the main power in the electricity box and confirm the fire wire is not alive with a test pencil. ● Remove the base of the Smart Switch and install it in the wall box (as shown in the pictures following). -
Page 9: Installation Drawings
4.1 Installation drawings... -
Page 10: Wires Connection Drawing
Depth of the wall box should be more than 50mm. 4.2 Wires connection drawing... -
Page 11: Safety Notes
Chapter 5 Operation guideline 5.1 Safety Notes***** ●The product must be installed by professional electricians. ● Turn off the main power in the electricity box and confirmthe fire wireisnot alive with a test pencil. ● The product should be kept away from fire and water during installation and use. -
Page 12: Chapter 5 Operation Guideline
connect PoE switch to this product which would cause damage to the product. 5.2 Operation guideline *This operation guideline is based on Tuya ZigBee, Tuya App,Tuya cloud platform and Gosvn S8 firmware. If any other platforms or firmware, please follow their operation guidelines. - Page 13 (2) There are two options in the network settings. You can select wireless connection or wired connection. There will be a QR code showing on the screen after the network connection is done. (3) Start the Tuya App in your smart phone, select the “ ”...
- Page 14 (3) Scan the QR code on the screen of the product to add it into the Tuya App. You will find an S8 panel icon in your App. (4) Get into the product interface in the Tuya App, you will see the gateway and switch icons like .
- Page 15 orange. Long press switch 1 or switch 2 to change the name of the switch. (5) Click the gateway icon to add ZigBee sub devices. Make sure the ZigBee sub devices are in the set-up mode. The gateway will search and add the sub devices automatically.
- Page 16 sub devices are in the set-up mode and the LED indication light is flickering. (6) Click the finish button on the App after you add the sub device successfully. For example (2 switches panel) as the following.
- Page 17 (7) You could change the name of the sub devices after they are added to the gateway successfully. (9) You could change the device type by getting into the...
- Page 18 device interface in the App. It means the switch is off when it is in grey, and the switch is on when it is in green. You could also set up timers(Schedule) for the switches to realize the automation control. (10) If you want to add your devices faster,click the“...
- Page 19 If there is any questions when you add some other sub devices, please contact us for support.
Need help?
Do you have a question about the S8E and is the answer not in the manual?
Questions and answers