Operations; Control Panel - Samsung WW8 TA Series User Manual

Operations

Control panel

01 Cycle Selector
02 Display
03 Temp.
04 Rinse
05 Spin
06 Options
07 Bubble Soak
08 Delay End
36 English
Untitled-9 36
02
01
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5, depending on the cycle.
Press to change the spinning speed for the current cycle.
• Rinse Hold (No indicator): The final rinse process is suspended so
that the laundry remains in the water. To unload the laundry, run a
drain or spin process.
- To use the Rinse Hold option, press Spin
the Spin option indicators turn off.
• No Spin : The drum does not spin after the final drain process.
- To use the No Spin option, press Spin
option indicator ( ) turns on.
Press to select an option from Intensive, Prewash, and Rinse+. Press
again to deselect.
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
Delay End lets you set the end time of the current cycle. Based on your
settings, the start time of the cycle will be determined by the machine's
internal logic. For example, this setting is useful for programming your
machine to finish a wash at the time you normally return home from
work.
• Press to choose a preset unit of hours.
03 04 06
05
10
08
11
09
07
repeatedly until all
repeatedly until the
2021-02-03 11:14:51