Kogan 9 RT9230 Series Quick Start Manual page 7

ASSEMBLY AND INSTALLATION
3. Connect to antenna
a.
Connect an antenna cable (not supplied) via the 'ANT' input port at the back
of the TV.
b.
Ensure the antenna cable is also connected to a working antenna,either via
an antenna wall socket in your home, or directly.
3a
4. Turning TV on
Plug the power cord into a suitable power outlet, then press the POWER ( )
button on the remote control, making sure to aim it at the sensor at the front of
the TV. Alternatively, you can press the power button on the lower side of the
back panel on the TV.
TURNING TV OFF
Press the POWER (
To power down the TV completely, unplug the power cord from the power
outlet.
Do not leave your set in standby mode for long periods of time. If you will
not use the TV for a long time, it is recommended to unplug the set from
both the power outlet and aerial.
)
button on the remote control to enter standby mode.
7
Antenna
wall socket
3b
Antenna cable
(not supplied)