Surround Sound - LG SL7Y Owner's Manual

18 Connecting
>
Caution
y Use the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
y Be sure to match the speaker cable to the
appropriate terminal on the components: +
to + and – to –. If the cables are reversed, the
sound will be distorted and will lack bass.
2
LED indicator of wireless receiver
LED Color
Yellow - green
(Blink)
Yellow - green
Red
Off
(No display)
Setting up the wireless receiver for the
first time
1. Connect the power cord to the wireless receiver
to the outlet.
2. Turn on the main unit: The sound bar and wireless
receiver will be automatically connected.
- Yellow - green LED on the wireless receiver
turns on.
Status
The connection is trying.
The connection is completed.
The wireless receiver is in standby
mode or the connection is failed.
The power cord of wireless
receiver is disconnected.
Manually pairing wireless receiver
When your connection is not completed, you can
see the red LED on the wireless receiver and rear
speakers do not make sound. To solve the problem,
follow the below steps.
1. Press PAIRING on the rear of the wireless
receiver.
- The yellow - green LED on the wireless receiver
blinks quickly.
2. Turn on the main unit
- Paring is completed. The yellow - green LED on
the wireless receiver turns on.

Surround sound

You can enjoy magnificent surround sound for all the
input sound source with rear speakers.
If you turn on the surround function, the whole
speaker outputs sound.
When you turn off the surround function, the
speakers output sound as an original input sound
channel.
To turn on surround function, press and hold
the remote control for about 3 seconds and press it
once again while "OFF - SURROUND" is scrolled.
To turn off surround function, press and hold
the remote control for about 3 seconds and press it
once again while "ON - SURROUND" is scrolled.
on
on