Table of Contents
Advertisement
Quick Links
Farmhouse Co ee Table Dimensions shown in diagram
Preparation
SHOPPING LIST
4 - 2x6 - stud length or 8 feet
1 - 2x4 - stud length or 8 feet
3 - 2x2 furring strips, 8 feet long
100- 2-1/2" long self tapping screws (I used these
(https://www.homedepot.com/p/GRK-Fasteners-8-x-2-1-2-in-Star-Drive-Trim-
Finishing-Trim-Head-Screw-100-per-Pack-119730/203525326)from Home Depot)
Wood glue
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HOMEDEPOT Farmhouse Coffee Table
Summary of Contents for HOMEDEPOT Farmhouse Coffee Table
- Page 1 4 - 2x6 - stud length or 8 feet 1 - 2x4 - stud length or 8 feet 3 - 2x2 furring strips, 8 feet long 100- 2-1/2" long self tapping screws (I used these (https://www.homedepot.com/p/GRK-Fasteners-8-x-2-1-2-in-Star-Drive-Trim- Finishing-Trim-Head-Screw-100-per-Pack-119730/203525326)from Home Depot) Wood glue...
- Page 2 Optional corner braces (I used these (https://www.homedepot.com/p/Everbilt-1-1-2- in-Black-Corner-Brace-4-Pack-20287/204727565)from Home Depot) CUT LIST 4 - 2x6 @ 46" - tabletop boards 4 - 2x4 @ 16-1/2" - legs 10 - 2x6 @ 18" - shelf/ends 4 - 2x2 @ 37" - aprons/shelf sides 4 - 2x2 @ 19-1/2"...
- Page 3 Instructions STEP 1 (/sites/default/files/2019-11/farmhouse%20co ee%20table%20plans%20step%201.jpg) Attach legs to two of the 2x6 @ 18" with two screws per joint. Use glue at all joints. Build two.
- Page 4 STEP 2 (/sites/default/files/2019-11/farmhouse%20co ee%20table%20plans%20step%202.jpg) Set the two leg sets on a level surface. Attach two leg sets together with 2x2s, two screws per joint and ample wood glue. If your 2x2 is splitting, predrill holes first, then attach with screws. TIP: Screws attached at a slight angle will help strengthen this joint.
- Page 5 STEP 3 (/sites/default/files/2019-11/farmhouse%20co ee%20table%20plans%20step%203.jpg) Place first long X piece in the co ee table end and attach with glue and screw from top and bottom. Set second X piece along side first, and mark where the two pieces cross. Cut the second piece along the marked lines. Place two cut pieces inside the co ee table and attach from top and bottom and middle.
- Page 6 STEP 4 (/sites/default/files/2019-11/farmhouse%20co ee%20table%20plans%20step%204.jpg) Attach one of the 2x6 @ 18" in about the center of the co ee table with two screws per joint and glue.
- Page 7 STEP 5 (/sites/default/files/2019-11/farmhouse%20co ee%20table%20plans%20step%205.jpg) Lay out the 2x6 tabletop boards on a flat, level surface, with best side of tabletop boards face down. Apply glue to top edges of co ee table frame, and place co ee table frame upside down on the tabletop boards.
- Page 8 STEP 6 (/sites/default/files/2019-11/farmhouse%20co ee%20table%20plans%20step%206.jpg) Position the middle shelf slat centered on the co ee table bottom shelf. Attach with 2 screws per joint. Place remaining slats inside the frame and attach with 2 screws per joint. The gap is about 1" in between (slightly less).
Need help?
Do you have a question about the Farmhouse Coffee Table and is the answer not in the manual?
Questions and answers