1 Preliminary note This document is part of the device and contains information about the correct handling of the product� This document is intended for specialists� These specialists are people who are qualified by their training and their experience to see risks and to avoid possible hazards that may be caused during operation or maintenance of the device�...
3 Functions and features In combination with the IO-Link master the read/write head DTI410/DTI411 is used for non-contact reading and writing of RFID tags that conform to the system� The data is available as process data at the IO-Link interface�...
Such devices are for example frequency converters and switched-mode power supplies� 5.4 Mechanical design 1: Sensing face 5.5 Fixing ► Fix the device using the supplied nuts (M12)� flush (DTI410) non-flush (DTI411)
5.6 Mounting distances 5.6.1 DTI410 Operating mode Distance side (A) Distance front (B) For reading and writing ≥ 20 mm ≥ 40 mm 5.6.2 DTI411 Operating mode Distance side (A) Distance front (B) For reading and writing ≥ 25 mm...
5.7 Positioning of the ID tags 5.7.1 DTI410 ► Align the ID tag on the antenna central axis� Distance read/write head (D) ID tag Type metal plastics E80370 0���10 mm E80371 5���10 mm 0���16 mm All indications apply to static read/write operations�...
► Disconnect power before connecting the unit� 6.1 Wiring ► Connect the unit to the IO-Link master via the M12 connector� > Voltage is supplied via the IO-Link master� IO-Link A selection of sockets is available on our website at: www�ifm�com...
7 Display elements DTI410 DTI411 LED 2 x 180° LED 2 x 180° LED green: operating voltage LED yellow: ID tag Status Description Green Operating voltage OK Operating voltage missing FLASHING SLOWLY Deactivated Yellow ON (permanently) ID tag detected ON (pulse)
9 Dimensions 9.1 DTI410 9.2 DTI411 10 Technical data The data sheets are available on our website at: www�ifm�com 11 Maintenance, repair and disposal ► Do not open the housing as the device does not contain any components which must be maintained by the user� The device must only be repaired by the manufacturer�...
Page 13
Use in all EU countries 12.1.3 EC declaration of conformity ifm electronic gmbh hereby declares that the DTI410 / DTI411 radio system corresponds to the directive 2014/53/EU� You can find the EC declaration of conformity on our website at: www�ifm�com�...