Error Signals - Bush WMDF714B Instruction Manual

Product support
Help is always at hand

Error Signals

Your machine is equipped with systems which will take the necessary precautions and warn you in case of any.
IMPORTANT: IT CAN TAKE UPTO 10 MINUTES FOR ERROR TO REGISTER.
Failure code
E01
E02
E03
E04
(*) See the section regarding the care and maintenance of your machine.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
34 Product support
Probable failure
The door is not shut properly.
The water level in your machine is
below heater. The pressure of your
water supply may be low or water
supply may be blocked.
The pump has failed or the pump
filter is obstructed.
Your machine has excessive
amount of water.
Process to be followed
Shut the door properly so
that you hear the click. If the
problem persists, turn off the
machine unplug and contact the
nearest authorised service agent
immediately.
Turn on the tap fully. The water
supply may be interrupted. If the
problem persists, your machine
will automatically stop after a
while.Unplug your machine,
turn off the tap and contact the
nearest authorised service agent
immediately.
Clean the pump filter.If the
problem persists and contact the
nearest authorised service agent
immediately. (*)
Your machine will discharge water
by itself. Pursuant to discharging
operation, turn off your machine
and unplug it. Turn off your tap
and contact the nearest authorised
service.