IPCorder KNR-2008/12/16
Quick Installation Guide
Thank you for purchasing this KOUK
will quickly guide you through the setup process. For more information please refer to the User manual available
on the enclosed CD or download it from
is designed for the firmware version installed in your IPCorder.
Important safety instructions
The purchased device works under voltage. If wrongly handled the device could be damaged or cause injury
to the person handling the device
• The manufacturer is not liable for potential damage caused by incorrect usage or placing the device in an unsuitable
environment.
• The device is not designed for outdoor use.
• Do not use the device in an environment with strong vibrations.
• Unauthorized modification of this device can damage it or cause a fire.
• Prevent from contact with fluids; do not expose the device to high temperatures.
• Protect the device from falling.
• Do not cover the device. Doing so may cause the device to overheat, which can cause damage to the device.
• It is permitted to use accessories only intended for the device (hard disks, cables, etc.).
• In case of the malfunction of the device, contact your dealer.
• The manufacturer is not liable for damage to the product that is caused by unusual or unforeseeable circumstances
(force majeure).
This guide is intended for IPCorder KNR-2008/2012/2016. Individual models differ by the maximum possible number
of simultaneously connected cameras or video-servers:
• KNR-2008: up to 8 cameras or video-servers
• KNR-2012: up to 12 cameras or video-servers
• KNR-2016: up to 16 cameras or video-servers
M product. Before you start using it, please read this installation guide which
. Please make sure that the manual you are using
1