Xaoc Devices OSTRAWA Owner's Manual

Full stereo voltage controlled mixing console

Advertisement

Quick Links

full stereo
voltage
controlled
mixing console
Model of 1966
operator's manual
rev. 1966/1.0

Advertisement

Table of Contents
loading

Summary of Contents for Xaoc Devices OSTRAWA

  • Page 1 full stereo voltage controlled mixing console Model of 1966 operator’s manual rev. 1966/1.0...
  • Page 2: Installation

    +12V and +5V power rails. a super-clean and DC-coupled signal path Unless you are using Ostrawa with the Bo- designed with high-quality VCA and opamp humin expander, make sure the factory-in- chips. We have carefully crafted Ostrawa's...
  • Page 3: Front Panel Overview

    front panel overview...
  • Page 4: Volume Control

    Ostrawa. STEREO VS MONO SOURCES Ostrawa features four stereo pairs of inputs, which enable mixing up to four stereo sourc- es. However, monophonic sources may also be mixed in, as each stereo pair of inputs is in-...
  • Page 5: Panorama Control

    PANORAMA CONTROL 0dB, offering only up to +3dB to minimize distortion. This behavior affects the sound Ostrawa offers both manual and CV control similar to dynamic compression; however, over the position of each source in the output lowering the attenuators' setting diminishes stereo panorama.
  • Page 6: Auxiliary Outputs

    The stereo pair of aux send a outputs and Ostrawa does not offer control of the return the pair of stereo aux return a inputs facil- level. Therefore, you must take care of prop- itate adding external effects in parallel to the er external attenuation of your effect signal.
  • Page 7 & chaining 1967 VOLTAGE CONTROLLED MIXING SURFACE POWER CONNECTOR fig. 6: chaining multiple ostrawa and praga units -15dB, -10dB, and 0dB referenced to a 10Vpp module in the chain). The chaining headers at the back of the module (fully compatible signal.
  • Page 8 MAIN FEATURES WARRANTY TERMS XAOC DEVICES WARRANTS THIS PRODUCT TO BE FREE OF DEFECTS IN MATERIALS OR WORKMANSHIP Full stereo AND TO CONFORM WITH THE SPECIFICATIONS AT THE TIME OF SHIPMENT FOR ONE YEAR FROM THE architecture DATE OF PURCHASE. DURING THAT PERIOD, ANY MALFUNCTIONING OR DAMAGED UNITS WILL BE REPAIRED, SERVICED, AND CALIBRATED ON A RETURN-TO-FACTORY BASIS.

Table of Contents