Start A Timed Count - GQ Electronics GMC-SE User Manual

There are 5 preset durations from menu: 1 minutes, 10 minutes, 100 minutes, 12 Hours and
24 Hours.
If the duration is not listed, then you can set a new duration (1 second to 256 days) from
menu other duration:
This example shows a 2 days duration is set for Timed Count.
Navigation keys:
Key1: Back/Exit
Key2: Increase the cursor position value
Key3: Decrease the position value.
Key4: Move the cursor to input data type between Day, Hour, Minute and Second.

Start a Timed Count

If no schedule is set, then the Timed Count will start immediately after the duration set.
If the schedule is set, then the Timed Count will start after the scheduled time period has
passed. This is useful if a testing target is not ready immediately.
Once the Timed Count schedule is active, the Timer icon will be show up on the top icon area.
When the Timed Count has started, the screen will pop up a message: Timed Count Started.
The Timed Count can be cancelled anytime.
Now you can exit the menu and see the Timed Count progress screen and information:
24