Table of Contents
Advertisement
Using the On-Screen Display(OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Press
2. Use
3. Press
4. Press and hold
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold
6. The ENERGY STAR option resets all user settings to default values so that the monitor
2-4 G27-20 Flat Panel Monitor User's Guide
G27-20
i
Model
Firmware
Resolution
Max Refresh Rate
Mode
Format
Range
HDR
Input Signal: HDMI
to open the main OSD menu.
or
to move among the icons. Select an icon and press
function. If there is a sub-menu, you can move between options using
press
to select that function. Use
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
adjustments to the OSD.
disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.
can meet the requirements of Energy Star.
1920x1080@60hz
G27-20(FreeSync Premium)
L 1.0
1920x1080
144Hz
Normal
8bit
RGB444
Full Range
OFF
or
to make adjustments then press
for 10 seconds to unlock the OSD and allow
to access that
or
, then
to save.
for 10 seconds to
Advertisement
Table of Contents
