Advertisement
Quick Links
Advertisement
Related Manuals for Diamond DT224/PMA+EV
Summary of Contents for Diamond DT224/PMA+EV
- Page 1 08/2012 Mod: DT224/PMA+EV Production code: 10102703-S-0-K (L2)
- Page 2 Manual de Instruções Instruction Manual Mode d’Emploi Gebrauchsanleitung N.º MNS00027.02 Manuale d’Istruzioni Manual de Instrucciones Gebruiksaanwijzing BANCADAS REFRIGERADAS REFRIGERATED COUNTERS TABLES RÉFRIGÉRÉES KÜHLTRESEN BANCHI REFRIGERATI MESAS FRÍAS REFRIGERADAS GEKOELDE WERKTAFELS...
- Page 3 N.º INSTRUCTIONS MANUAL MNS00027.02 INDEX Page Reception ID plate Recommendations for Installation 3.1 General notes 3.2 Placement 3.3 Installation 3.4 Power cord replacement Recommendations to the User 4.1 Starting-up Brake working instructions Instructions to change the door against a glass door PJ microprocessor instructions 4.5 Defrost 4.6 Cleaning...
-
Page 4: Recommendations For Installation
N.º INSTRUCTIONS MANUAL MNS00027.02 The European directive on Waste from Electrical and Electronic Equipment (WEEE) specifies that, at the end of its life cycle, the equipment and all of its components, subassemblies and consumable materials should be sent separately for treatment for it to be destroyed, recycled or reused. Do not put equipment with this symbol together with unseparated urban waste. - Page 5 N.º INSTRUCTIONS MANUAL MNS00027.02 When putting in food, make sure that there is good natural circulation of air inside. Do not put in hot drinks or hot food. Do not block the air circulation vents as this will seriously affect the efficiency of the compressor. Do not use pointed objects to remove ice - that could damage the evaporator and be dangerous to health and environment.
- Page 6 N.º INSTRUCTIONS MANUAL MNS00027.02 4.4 – PJ microprocessor instructions 4.4.1 Definitions St - set point Rd - Differential Set Point – The lowest temperature in ºC inside the counter. Differential – Interval of temperature in ºC for the working of the counter. 4.4.2 Change of the SET POINT (inside minimum temperature of the cabinet) 1- Press the key for 1 second to display the value of the SET POINT ;...
- Page 7 N.º INSTRUCTIONS MANUAL MNS00027.02 HI = St + AH Possible configuration for HACCP control on the refrigerated equipment with PJ controller (each user must program the controller according to the specifications defined by him for each unit): St = 0 rd =3 AL =3 (the LO alarm trips at –3ºC) AH =8 (the HI alarm trips at 0+8=8ºC)
- Page 8 N.º INSTRUCTIONS MANUAL MNS00027.02 4.7 - Maintenance In order to ensure long life and correct operation of the refrigeration system, regular maintenance of the condensation should be carried out, as follows: Disconnect the cupboard from the electric current, by taking out the plug. Vacuum or lightly brush the condensation, according to the track direction.