Operating The Monitor - Philips EVNIA 34M2C7600MV User Manual

Some selected Philips displays may not
Power or Charge your device when it
enters to "Sleep/Standby" mode (White
power LED blinking). In that case, please
enter to OSD Menu and select "USB
Standby Mode", then, turn the function
to "ON" mode (default=OFF). This will
then keep the USB power and charging
functions active even when the monitor
is in sleep/standby mode.
SmartImage Game Mode Ambiglow Input
HDMI Refresh Rate USB-C Setting
OSD Setting USB Standby Mode
PIP/ PBP KVM
Smart Size
USB Setting
Local Dimming
Over Scan
Resolution Refresh Rate
3440X1440 60Hz
Warning
USB 2.4Ghz wireless devices, such
as, wireless mouse, keyboard, and
headphones, maybe have interference
by the high-speed signal of USB3.2
devices, which may result in a decreased
efficiency of the radio transmission.
Should this happen, please try the
following methods to help reduce the
effects of interference.
• Try to keep USB2.0 receivers away
from USB3.2 connection port.
• Use a standard USB extension cable
or USB hub to increase the space
between your wireless receiver and
the USB3.2 connection port.
Audio System Setup
High Resolution On
On Off
Auto
Input Source Adaptive Sync SmartImage
HDMI 1 Off SmartUniformity

2.2 Operating the monitor

1
Description of the control buttons
Close
Select
OK
Back
7
Press to switch power on.
Press more than 3 seconds to
switch power off.
Access the OSD menu.
Confirm the OSD adjustment.
Adjust the Game Setting.
Adjust the OSD menu.
Change the signal input
source.
Adjust the OSD menu.
SmartImage Game menu.
There are multiple selections:
Standard, FPS, Racing, RTS,
Movie, LowBlue Mode,
EasyRead, Economy,
SmartUniformity, Game 1
and Game 2
When the monitor receives
HDR signal, SmartImage
will show HDR menu. There
are multiple selections: HDR
Game, HDR Movie, HDR
Photo, DisplayHDR 1400,
Personal, and Off.
Return to previous OSD level.