Audio Note DAC2 Installation

Congratulations on your purchase of the Audio Note™ DAC2.
The DAC2 was specifically designed and engineered for the best sonic
performance rather than technical specifications. Although the DAC2 is a digital
component (there is no avoiding this unfortunately!), it will bring a new level of
musicality to your CD's and is fatigue free during extended listening periods. In
order to obtain the best possible performance and longevity from your DAC, please
read over this manual carefully.
Technology
Not surprisingly for an Audio Note™ product, the DAC uses vacuum tube technology
implemented using traditional Audio Note™ techniques with simple signal paths
incorporating no correction or feedback operating the valves at their most linear
operating points for best sound and longevity.
Unlike its smaller brother the DAC1, the DAC2 uses the patented analogue
transformer coupled filter interface (US patent no. 5420585, UK patent no. 2270595,
Australian patent no. 670611), which substantially improves the conversion from
digital to analogue replay. Also Audio Note copper wired Mumetal core Interface
transformer and Audio Note AN-C Copper wiring.
UNPACKING & INSTALLATION.
Please take care when unpacking the DAC. We recommend that you store the
packing materials in case the unit requires shipping at a later date.
Next, select a suitable location for the unit, ensuring that adequate ventilation is
provided (the vacuum tubes do generate some amount of heat). In the interest of
safe, reliable operation, situate the DAC away from dampness or direct sunshine.
Worthwhile sonic improvements may be obtained by locating the unit on a suitably
designed audio component support system.
- - 1