Important safety instructions Warning • The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. • Refer to safety information before using the product.
Page 3
The alarm is activated. End calls. Call log It remains steadily on when browsing incoming B385 only: Answering machine: it flashes when Turn the speaker on/off. Loudspeaker Make and receive calls. calls in the call log. there is a new message. It remains steadily (back side) Mute/unmute the microphone.
Get started Insert batteries Charge your phone Configure your phone 1 When using your phone for the first time, you see a welcome message (country dependent). Charge 8 hours 2 Set the country and language if prompted. 3 Set the date and time. > 70% 10% - 40% • If the time is in 12-hour format, press to select [am] or [pm] (country dependent).
Page 6
Enjoy Phonebook Call log Record an announcement Restore default settings (for B385 only) Add record Call from the call log You can reset your phone settings to the original factory settings. 1 Press 1 Press 1 Press 1 Press 2 Select [Phonebook] > [Add new].
Technical data Battery • Philips: 2 x AAA NiMH 1.2 V Rechargeable 550 mAh batteries Use only the supplied batteries. Adapter Base and charger: Philips: S003IB0600040 SSW-1920UK-2 Input: 100-240 V 100-240 V 50/60 Hz 0.15 A 50/60 Hz 0.2 A...
Page 8
Frequently asked questions No signal bar is displayed on the screen. My handset is in searching status, what do I do? The handset on the charger does not charge. The handset does not ring. • The handset is out of range. Move it closer to the • Make sure that the base station has power supply.
Page 9
For information, refer to the extended user documentation online.