Table of Contents
Advertisement
Quick Links
Instructions for use
GB
English,1
BWA 81483
WASHING MACHINE
Contents
Installation, 2-3-4-5
Cutting off the water or electricity supply
Wash cycles, 10
Personalisation, 11
Troubleshooting, 13-14
tion, 15
GB
1
Advertisement
Table of Contents
Related Manuals for Indesit BWA 81483
Summary of Contents for Indesit BWA 81483
-
Page 1: Table Of Contents
Checking the water inlet hose Precautions and tips, 7 General safety Load balancing system Disposal Description of the washing machine BWA 81483 and starting a wash cycle, 8-9 Control panel Indicator lights Starting a wash cycle Wash cycles, 10 Push & Wash... -
Page 2: Installation
Installation ! This instruction manual should be kept in a safe Levelling the machine correctly will provide place for future reference. If the washing machine it with stability, help to avoid vibrations and is sold, transferred or moved, make sure that the excessive noise and prevent it from shifting instruction manual remains with the machine so while it is operating. - Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate fixed on Connect the drain the machine. hose, without bending it, to a draining duct or • the socket is compatible with the washing a wall drain situated machine’s plug.
-
Page 4: The First Wash Cycle
Technical data If you are in any doubt regarding the electrical supply to your machine, consult a qualified Model BWA 81483 electrician before use. width 59.5 cm How to connect an alternative plug: Dimensions... -
Page 6: Care And Maintenance
Care and maintenance Cutting off the water and electricity Cleaning the pump supplies The washing machine is fitted with a self- • Turn off the water tap after every wash cycle. cleaning pump which does not require any This will limit wear on the hydraulic system inside maintenance. -
Page 7: Precautions And Tips
Precautions and tips Disposal This washing machine was designed and constructed in accordance with international safety regulations. The fol- • Disposing of the packaging materials: observe local lowing information is provided for safety reasons and must regulations so that the packaging may be re-used. therefore be read carefully. -
Page 8: Description Of The Washing Machine And Starting A Wash Cycle
Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS FUNCTION indicator lights buttons with indicator lights DOOR START/PAUSE ON/OFF LOCKED button with indicator button indicator light light CHILD LOCK WASH CYCLE DELAY TIMER Detergent dispenser drawer TEMPERATURE button with knob... -
Page 9: Indicator Lights
Indicator lights Wash cycle phase indicator lights Once the desired wash cycle has been selected and has be- gun, the indicator lights switch on one by one to indicate which The indicator lights provide important information. phase of the cycle is currently in progress. This is what they can tell you: Wash Delayed start... -
Page 10: Wash Cycles
Wash cycles Push & Wash This function allows for starting a wash cycle even when the machine is switched off without having to press the ON/OFF button in advance, or after switching on the machine, without having activated any button and/or selector (otherwise, the Push &... -
Page 11: Personalisation
Personalisation Setting the temperature Press the TEMPERATURE button to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash (20°). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. -
Page 12: Detergents And Laundry
Detergents and laundry Detergent dispenser drawer Delicates: use programme 4 to wash very delicate Successful washing results also depend on the correct garments. It is advisable to turn the garments inside out dose of detergent: adding too much detergent will not before washing them. -
Page 13: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. •... - Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 15: Product Guarantee And Repair Information
Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Indesit’s continued commitment to 12 Months Parts and Labour Guarantee helping the environment, Indesit reserves the right Your appliance has the benefit of our manufacturer’s to use quality, recycled components to keep down guarantee, which covers the cost of breakdown customer costs and minimise material wastage. - Page 16 195151806.00 10/2016 Indesit Company Spa Viale Aristide Merloni, 47 60044 Fabriano (AN) Italy www.indesit.co.uk...