Summary of Contents for Habitat DERWENT DERW-BT-SS20-A
Page 1
Assembly Instructions - Please keep for future reference DERW-BT-SS20-A Dimensions Width - 50cm Depth - 40cm Height - 62cm Tools required Important – Please read these instructions before assembly If you need help or have damaged or missing parts, email: customerservices@habitat.co.uk 0344 499 4686 or call:...
Page 2
Check you have all the components and Assemble the item as close to its final tools listed on the front cover and position (in the same room) as possible. page 3. Remove all fittings from the plastic bags and separate them into their groups. Assembly requires at least 2 people Always lift and move.
Page 3
Components and Fittings If you need help or have damaged or missing parts, email: customerservices@habitat.co.uk or call: 0344 499 4686 Please check you have all the panels listed below...
Page 4
Assembly Instructions Assembly Instructions Please keep safe for future reference Before assembling the furniture please identify all component parts. It would be sensible to assemble the furniture as close to its final position as possible. Do not place furniture directly in front of radiators, fires or any source of heat. Ensure the surface on which you are assembling the furniture is flat and clear of anything that might scratch it.
Page 10
Assembly Instructions Step14: Step15: WARNING! In order to prevent overturning this product must be used with the wall attachment device provided. Serious or fatal crushing injuries can occur from furniture tipping over. To help prevent topple over :- -Use the wall attachment devices provided -Never allow children to climb or hang on drawers -Do not overload the drawer beyond maximum recommended loading.
Page 11
Assembly Instructions Step16 : Step17 : Step18: Attaching the bracket to the wall...
1: General rule: Always use a larger screw and wall plug if you are not sure. different wall types, Habitat cannot provide you with the 2: Ensure you use the recommended drill bit to match the wall exact fixings you will need to plug and hole size.