Summary of Contents for Noise NoiseKen 18-00048B
- Page 1 INSTRUCTION MANUAL CONNECTING TERMINAL BASE (For single phase/30A) 18-00048B MODEL NOISE LABORATORY CO., LTD. 1.07 Edition AEE00037-00E-0H...
- Page 2 Noise Laboratory Co., Ltd. shall have no liability for any trouble resulting from the remodeling or modification of this product. In no event shall Noise Laboratory Co., Ltd. be liable for any results arising from the use of this product.
-
Page 3: Important Safety Precautions
1. IMPORTANT SAFETY PRECAUTIONS Thoroughly understand the following precautions before use, as they are important matters for handling this unit in safety. 1. As the high voltage and great electric current (15kV 7500A maximum) are passed through the terminals and sockets of this unit, peruse the instruction manuals of this unit and the lightening surge simulator this product is going to work with and carefully handle them according to instruction on the manuals. - Page 4 MEMO...
-
Page 5: Application Form For Instruction Manual
When an INSTRUCTION MANUAL is required, fill in the above Application Form and mail or fax it to the following sales department of our company. To: Noise Laboratory Co., Ltd. 1-4-4 Chiyoda Sagamihara City, Kanagawa Pref., 229-0037 Japan Tel: +81-(0)42-712-2051... - Page 6 MEMO...
-
Page 7: Table Of Contents
3. TABLE OF CONTENTS 1. IMPORTANT SAFETY PRECAUTIONS ................. 1 2.APPLICATION FORM FOR INSTRUCTION MANUAL ............ 3 3. TABLE OF CONTENTS ....................5 4. PREFACE ........................6 5. HOW TO CONNECT ....................... 7 6. SPECIFICATIONS ......................8 7. WARRANTY ........................9 8. -
Page 8: Preface
4. PREFACE We thank you for your purchase of the Connecting Terminal Base (Model: 18-00048B) for the Lightning Surge Simulator LSS series. This unit provides a socket to put in a plug of the EUT when performing an AC line test using the LSS-F03. A versatile socket is used so that the plug used in the various countries can be put in. -
Page 9: How To Connect
5. HOW TO CONNECT 1. Connection of the 18-00048B with the LSS-F03 Connect the connectors of the high voltage output cables (LSS-F03 standard accessories) with the LSS-F03, and connect the other sides (the solderless terminal sides) with ①Input terminal of the 18-00048B. (Notice) Each input terminal indicates “L”, “N”... -
Page 10: Specifications
6. SPECIFICATIONS Item Specifications Notice For using terminal base Voltage / Current operation range AC240V/20A Max (50/60Hz) DC125V/20A Max For using outlet Refer to the table 1 as under. For using terminal base Surge input voltage ※1: Combination wave ±15kV Max For using outlet ※1: Combination wave ±4.5kV Max... -
Page 11: Warranty
7. WARRANTY Servicing terms The following terms are applicable to servicing by Noise Laboratory Co., Ltd., (hereafter referred to as the Company) provided to maintain the intended performance of its products. 1. Scope The following terms shall apply only to products made by the Company. - Page 12 Limited warranty Noise Laboratory Co., Ltd. (hereafter referred to as the Company) warrants its products to be free from defects in materials and workmanship under normal use and service for a period of one year from date of delivery. In the event of failure of a product covered by this warranty, the Company will repair the product or may, at its option, replace it in lieu of repair without charge.
-
Page 13: Maintenance
8. MAINTENANCE When repair, maintenance or internal adjustment of the unit is required, a qualified service engineer takes charge of such work. Maintenance on the user side is restricted to the outside cleaning and functional check of the unit. When checking or replacing the fuse, turn off the switch of the unit and disconnect the plug socket beforehand. -
Page 14: Support
Noise Laboratory or our nearest sales agent in your area. When the product is returned to Noise Laboratory, write the state of the trouble, contents of your request, model name and serial number in a repair order, pack the product and repair order sheet in the former package or equivalent suitable for transit, and send them back. - Page 15 MEMO...
- Page 16 NOISE LABORATORY CO., LTD. 1-4-4, Chiyoda, Sagamihara City, Kanagawa Pref., 229-0037, Japan TEL: +81-(0)42-712-2051 FAX: +81-(0)42-712-2050 URL: http://www.noiseken.co.jp PRINTED IN JAPAN...