Standard Repair Process Detail Technical Manual
symptom
Content
Error
A. Video error_Video error, video lag/stop
Tuner input signal strength checking method
Established
date
Revised
date
1. Press 'MENU' button on Factory Service remote control.
2. Enter into Manual Tuning menu as below.
All Settings Programmes Programme Tuning & Settings
Manual Tuning
3. Check the signal level.
A3
When the signal is strong,
use the attenuator
(-10dB, -15dB, -20dB etc.)
Copyright © 2019 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
A3