Table of Contents
Advertisement
TV Menu Operation
CHANNEL MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Auto Tuning
- Allows you to retune the television for all digital channels, digital radio stations and
analogue devices.
Analogue Manual Tuning
Freeview Manual Tuning
Channel Edit
- Allows you to delete, move, skip and favourite channels.
Signal Information
CI Information
- Pay per view services require a "smartcard" to be inserted into the TV. If you subscribe to
a pay per view service the provider will issue you with a 'CAM' and a "smartcard". The CAM can then be
inserted into the COMMON INTERFACE PORT (CI Card In).
Schedule List
- Lists your programme reminders.
Recorded List
- Shows a list of recorded TV programmes via a connected USB memory stick or USB
hard drive.
Software Update (OAD)
Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change
the length of time before the menu exits automatically - see 'OSD Timer' in the Time Menu
20
- Allows you to manually tune your analogue signal.
- Allows you to manually tune your digital signal.
Important: To receive Freeview channels, in particular
Freeview HD channels, you will need a Digital TV aerial
and be in a good Freeview coverage area. You can check
coverage for your postcode at www.freeview.co.uk
Please note that any Freeview HD channels found during
tuning will be placed in channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
- Allows you to view signal frequency, signal quality and signal strength.
- Switch on/off OAD updates.
buttons.
Advertisement
Table of Contents
