Summary of Contents for Jiajia BMW S1000RR RIDE-ON
Page 1
BMW S1000RR RIDE-ON Owner’s Manual with Assembly Instructions Styles and colours may vary. Made in China. The owner’s manual contains important safety information as well as assembly, use and maintenance instructions. The Ride-on Car must be assembled by an adult who has read and understands the instructions in this manual.
Page 2
BMW S1000RR Children Electric Motorcycle manufactured by Zhejiang Jiajia Ride-On Co., Ltd. (Add: Xincang Industrial Zone, Pinghu City, Zhejiang Province, P.R.China). The BMW logo and the BMW word mark are trademarks of BMW AG and are used under license.
Parts List │ 2 Q’ty (pcs) PART PART NAME REMARKS Vehicle body View mirror Spanner Charger Ø4x12 screw One pair Bolt *Side wheel Ø10 locknut NOTE: Some parts shown are assembled on both sides of vehicle...
Before You Begin Assembly │ 4 WARNING! WARNING! FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE. ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE. •...
Page 5
Attach the Side Wheel │ 5 HINT: The kickstand was factory assemblyed already. If you want to use side wheel, Remove the kickstand please. Kickstand, factory done! 1. Fit the side wheel to the vehicle body from the left side. 2.
Page 6
Attach the View Mirror │ 6 1. Fit the View mirror to the facuguard, 2. Tighten a screw to secure it with a screwdriver. 3. Repeat for the other side.
Connect the Power Supply │ 7 Lock Fuse box 1&2. Turn the Lock on the top of seat and remove the seat. 3. Plug the Red fuse connector into the terminal on battery.
Page 8
Attach the Batteries of Handle bar │ 8 Insert the Batteries for Sound Effects ● DO NOT mix old and new batteries. ● DO NOT mix alkaline, standard (carbon-zinc) or rechargeable batteries. ● DO NOT charge non-rechargeable batteries. Always have adult supervision when charging rechargeable batteries. If you wish to use the sound effects, install two AA batteries (non provided) using the following steps: 1.
Page 9
Safety │ 9 WARNING! PREVENT INJURIES AND DEATHS: • NEVER LEAVE CHILD UNATTENDED. ADULT DIRECT SUPERVISION IS REQUIRED. Always keep child in view when child is in vehicle. • This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
Page 10
Use Your Ride-on │ 10 1. Power Switch: Turns the vehicle on and off. 2. High/Low speed switch: The switch operates the vehicle to move in low or high speed. 3. Sounds buttons: Press for sounds playing. 4. Foot pedal: Applies power (speed) to the vehicle. ADVANCED USE - High speed Drive Make sure your child knows how to steer, how to start and stop the vehicle and knows the rules for safe driving.
Page 11
Charging │ 11 ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY! WARNING! • PREVENT FIRE AND ELECTRIC SHOCK: - Use the only rechargeable battery and charger supplied with your vehicle. NEVER substitute the battery or the charger with another brand. Using another battery or charger may cause a fire or explosion. - Do not use the battery or charger for any other product.
Page 12
Charging │ 12 1. Plug the charger port into the input socket. (the socket is above the foot pedal) 2. Plug the charger plug into a wall outlet. The battery will begin charging. WARNING! This product has CHARGING PROTECTION: When charging, all the functions will be cut off!
Page 13
Battery Replacement & Fuse │ 13 The battery features a thermal fuse with a rest fuse that will automatically trip and cut all power to the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and power will be restored after the unit is turned OFF for five Minutes and then turned ON again.
Troubleshooting Guide │ 14 Possible Cause Solution Problem Vehicle dose not run Battery low on power Recharge battery. Thermal fuse has tripped Reset fuse, see <Fuse> Check if the battery connectors are firmly plugged into Battery connector or wires each other. If wires are loose around the motor are loose contact your distributor please.
Page 15
Maintaining │ 15 • It is parents' responsibility to check main parts of the toy before using, Must regularly examine for potential hazard, such as the battery, charge,cable or cord, plug, screws are fastening enclosure of other parts and that in the event of such damage, the toy must not be until that damage had been properly removed.
Page 16
Our products are suitable for ASTM F963; GB6675; EN71 and EN62115 standard.
Need help?
Do you have a question about the BMW S1000RR RIDE-ON and is the answer not in the manual?
Questions and answers