Download
Share
Print this page
  1. Manuals
  2. Brands
  3. A.G. PULIE Manuals
  4. Mixer
  5. Easymix TU-MIX
  6. Operating instructions manual

A.G. PULIE Easymix TU-MIX Operating Instructions Manual

Tip up cement mixer
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
TU-MIX
TIP UP CEMENT
MIXER
OPERATING INSTRUCTIONS

Advertisement

loading

Summary of Contents for A.G. PULIE Easymix TU-MIX

  • Page 1 TU-MIX TIP UP CEMENT MIXER OPERATING INSTRUCTIONS...
  • Page 2 INTRODUCTION Congratulations on your purchase of the tu-mix cement mixer. Masterfinish has a long and successful history in providing equipment to the construction trades in Australia and we are happy to add the Easymix range of mixers and wheelbarrows to that range. This booklet will provide a guide for the correct use, maintenance and safety precautions needed to operate the mixer in a safe manner.

  • Page 3: Operation

    OPERATION BEFORE USE Before using the mixer make sure it is placed on a flat surface with wheels supported. The mixer should only be used with a quality extension cord with a maximum length of 15m. Longer or poor quality cords could result in voltage drop which could damage the machine and trigger the safety mechanism.

  • Page 4: Mechanical Hazard

    HAZARD & RISK GENERAL • Do not allow the machine to be operated by an untrained person without adequate instruction • Serious injury could result from careless or improper use of the machine • Ensure all users understand and follow the operating instructions. •...

  • Page 5: Service And Maintenance

    SERVICE & MAINTENANCE • Service guide and recommended intervals can be found in the manufacturers manual. • To clean the machine. First unplug from the power source. • First wash the mixer arms and the bowl using water. SPECIFICATIONS TU-MIX PRODUCT CODE Tip Up Cement Mixer DESCRIPTION...

  • Page 6: Warranty

    WARRANTY A.G. Pulie provide a 12mth warranty for the TU-MIX mixer. This warranty is limited to defects in workmanship or parts and covers the machine components only. The warranty begins on date of supply (by the reseller) and applies when used in accordance with reasonable use and care.
  • Page 7 You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. A.G. Pulie Pty Ltd Ph: 02 9637 9011 PO Box 309 Email: sales@masterfinish.com.au...