Advertisement
Finley Power Motion Sofa
STEP 1
Remove the sofa back main cushions (x2) and transformer from the sofa.
STEP 3
When fitting sofa backs ensure the connecting clips are aligned and then
(with a person at each end) lower the back section into the base applying
firm pressure until you hear a 'click' and the back is secure.
STEP 5
Attach the leather cover at the back to the velcro strip to secure.
STEP 7
Press the front of the first button to recline your furniture.
STEP 9
Please follow these instructions carefully in order to ensure your new
sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your furniture as
this may damage the leather.
Please note that any creases in the leather are as a result of the
packaging and are perfectly normal. These will diminish over the first
few weeks of use at room temperature.
STEP 2
Pull the cables through the back of the sofa as shown above.
STEP 4
Connect both leads labelled 'headrest' together securing with attached clip.
STEP 6
Connect the cables from the sofa into the transformer provided and plug
into a standard mains socket.
STEP 8
Press the rear of the first button to return to the upright position.
STEP 10
Advertisement
