Download Print this page

BWI AIR-EAGLE SR PLUS 36-HH-9 Manual

2.4 ghz rf transmitter

Advertisement

Quick Links

AIR-EAGLE SR PLUS
36-HH-9
2.4 GHz RF Transmitter
Document Date: 5/16/2023
Product Rev: 12

Advertisement

loading

Summary of Contents for BWI AIR-EAGLE SR PLUS 36-HH-9

  • Page 1 AIR-EAGLE SR PLUS 36-HH-9 2.4 GHz RF Transmitter Document Date: 5/16/2023 Product Rev: 12...
  • Page 2: Warranty Statement

    36-HH-9 WARRANTY STATEMENT BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and installed, will be free from defects in material and workmanship for a period of 1 year after date of purchase. Said warranty to include the repair or replacement of defective equipment. This warranty does not cover damage due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing.
  • Page 3 36-HH-9 INTRODUCTION The Air-Eagle SR Plus is an RF system designed for short to medium range wireless remote control of electrical apparatus in a variety of industrial applications. Systems can consist of any number of receivers and handheld or contact input transmitters working together to create a short to medium range radio frequency system that operates hazardous or hard-to-reach equipment from safe, convenient locations.
  • Page 4: Controls And Indicators

    36-HH-9 CONTROLS & INDICATORS LED illuminates RED while button is pressed and unit is transmitting. TX LED When this LED blinks briefly following a transmission, the battery needs to be replaced. * Buttons 1 - 8 Transmits individual commands 1 - 8 to the receiver. The P/Shift button performs two functions: 1.
  • Page 5: Frequency Programming

    36-HH-9 FREQUENCY PROGRAMMING Read instructions completely before beginning programming procedure. Transmitters are shipped from the factory set to frequency 1 by default. The frequency can be changed at any time by following the procedure below. Once changed, it is recommended to label the transmitter with the selected frequency number.
  • Page 6 36-HH-9 POWER LEVEL PROGRAMMING Read instructions completely before beginning programming procedure. Transmitters are shipped from the factory set to power level 4 (max range 600 ft.) by default. The power level can be changed at any time by following the procedure below. *Note: Current power level setting is maintained in flash memory during battery replacement.
  • Page 7: Specifications

    36-HH-9 SPECIFICATIONS Durable Sealed Membrane Keypad – Eliminates Dust, Dirt and Keypad Moisture Failures Enclosure ABS UL94 HB Enclosure with ring is rated IP54 (Not Waterproof) Protective Ring SEBS (TPE) Power Requirements 3.0 VDC (2) 1.5V lithium each, size AA, to equal 3.0VDC nominal. For Battery Type best performance use only Energizer Brand Lithium Batteries.