Panasonic TX-77EZ1002B Ehelp page 343

Touch Pad Controller does not work or cannot be registered
Are the batteries installed correctly?
●
The batteries may be running low. Replace them with new ones.
●
Register again.
●
Functions > Touch Pad Controller > Settings
Use Touch Pad Controller within approx. 3.2 m from the TV. (The range
●
may be shortened depending on the obstacle between the TV and the
controller, or the surrounding environment.)
Voice Control function does not work
Voice Control function may not work properly depending on the
●
pronunciation, noise and network environment.
For details of the Voice Control function
●
Functions > Voice Control
LED does not turn to red in Standby mode
LED turns to orange in Standby mode in the following conditions:
●
– Recording is in progress.
– Timer Programming
– DLNA Server
– Powered On by Apps
– Home Streaming
– Powered On by Easy Mirroring
– TV Anywhere
LED turns to orange during adjustment of the panel (approx. 10 minutes to
●
maximum 80 minutes). LED turns to orange again in standby mode when
the TV is turned on / off before the panel adjustment is completed. (Be
sure to turn the TV off with the remote control to adjust the panel.)
When pushed with a finger, the display panel moves slightly and makes a
noise
There is a little gap around the panel to prevent damage to the panel. This
●
is not a malfunction.
is set.
is set to On.
is set to On.
is set to Always.
is set to On.
is set to On.
- 343 -