Page 4
Think of WANDLA like a Formula 1 racing car� Like the F1 constructor’s team building the best racing car, Ferrum created the best engine for The Converter� We transformed our ARM chip, making it capable of doing the work of five chips, and took the ESS Sabre DAC chip to the next level with our new current to voltage converter�...
Keep the WANDLA away from radiators, kettles, heat registers, stoves, or any other appliance that produces heat� Connect the WANDLA only to a power source that meets its requirements (voltage and amps)� We recommend using Ferrum power supplies� The safest and only method of isolating the device from the power supply is to disconnect the DC plug�...
Immediately unplug and stop using the WANDLA and have it inspected and/or serviced by a qualified service agency if: — the power cord or plugs have been damaged, — objects have fallen or liquid has been spilled into the unit, —...
H� ARC input I� I2S input J� trigger output (3�5 mm TRRS jack) K� Ferrum Power Link DC input (can be used with HYPSOS) L� 5�5/2�5 mm DC power input (can be used with other PSUs) WANDLA by Ferrum user’s manual...
5� CONNECTING THE WANDLA Note: Please connect all signal cables before connecting DC cable/switching on the WANDLA. W A N D L A COAX IN ARC IN I2S IN USB IN ANLG OUT ANLG OUT ANLG IN AES IN OPTO IN...
A� Input button When the Input button is touched, a list of all inputs available in WANDLA will appear� Swipe left and right to scroll through the list and activate the desired input with a tap� To go back to the main screen use the Back button�...
Left/right arrows - changes selected value Slider - changes selected value 7�3 Menu Structure 7�3�1 STANDBY This button turns on or puts WANDLA in standby mode� 7�3�2 AUDIO Contains audio settings� 7�3�2�1 Volume Control Allows you to set preferred volume regulation type refers to volume and trim�...
Page 12
It is best to reduce the input signal at the source to a minimum before the Bypass function is activated� Note: Ferrum refuses every liability for damage to equipment due to using Bypass function. 7�3�2�4 Theater Bypass Bypasses volume regulator for analog input only to use it with AVR source and its volume control�...
Page 13
Brightness of display in percent� It is relative to ambient brightness level or absolute when the ambient sensor is disabled� 7�3�3�2 Logo Brightnes Brightness of Ferrum logo in percent� It is relative to ambient brightness level or absolute when the ambient sensor is disabled� 7�3�3�3 Logo Stb Brightnes Brightness of the Ferrum logo in standby�...
● Input - external device can turn on/off the Wandla using trigger socket ● Output - Wandla can turn on/off external device using trigger connection 7�3�4�2 TV Control (CEC) Here you can turn on/off CEC control� CEC allows your TV to turn on/off the Wandla� 7�3�5 ABOUT 7�3�5�1 Contact Contains contact information to our company�...
Ferrum USB Audio Control Panel will allow you to change some settings and get information about the device� 10�2�1 STATUS Status of the device is shown in this tab� If it is detected you will see WANDLA name and motherboard serial number� Also current sample rate selection is displayed�...
Some information about the currently used Ferrum USB Audio Control Panel� 11� FIRMWARE UPDATE This paragraph will be updated as soon as a new firmware version for WANDLA is released�To check if new firmware is available please check our website: https://ferrum�audio/support/...
In case of need to send the WANDLA for service please pack the product very carefully, preferable in the original packing, to be sure no damage can be done during shipment�...
To properly dispose harmful substances and recycle the product, the user is obliged to return it at the point of collection of electrical and electronic equipment waste� For more information please contact your local authorities, waste disposal units or retailer� WANDLA by Ferrum user’s manual...